SFP-1GBT-06
SFP Copper Transceiver 1000Base-T to GBIC
28 Turkey Court, Turkey Mill, Ashford Road
Maidstone Bel ME 14 5PP UK
+44 1622 757 395
techhelp@belf.com
© 2017
Bel Power Solutions, Inc.
SFP-1GBT-06 v4_12.15
The Bel SFP-1GBT-06 transceiver is an internally configured 1000Base-T SFP module for
GBIC host interface. The host interface transmits and receives serial data differentially
at 1.25 Gbps. The copper interface is advertised as full duplex and will auto- negotiate
to 10/100/1000 Base-T.
Key Features & Benefits
• Designed with Broadcom’s BCM54616S chipset
• Complies with IEEE 802.3, 802.3u, and 802.3ab specifications
• Conforms to Multi-Source Agreement (MSA) specifications
for SFP transceivers
• Supports IEEE 802.3u and IEEE 802.3ab auto–negotiation features to
allow networking equipment to automatically determine and adjust the
required settings
• Operates in extended temperature range of -40° to +85° C
• Automatically compensates for baseline wander by removing DC offset from
the input signal
• Assembled with low EMI emissions IC and fully metallic housings
• Automatic dependent interface (DI) crossover, eliminating the need for
crossover cables or cross-wire (MDIX) ports
• Bail latch provides ease of extraction
• Compact RJ45 connector assembly
• Data is scrambled to reduce radiated emission
• Power consumption is 610mW typical
• Fully RoHS compliant
• The BCM54616S physical layer IC (PHY) can be accessed via I
2
C interface:
PHY address = “ACh”
EEPROM address = “A0h”
Applications
•
1000 Mbps data rate in excess of 100 meters of Category 5/5e cable
•
Industrial temperature environments -40° to +85° C
•
Networking equipment
•
Switch-to-switch interface
•
Routers
Regulatory and Standards Compliance
• Compliant with IEEE 802.3:2000
• FCC Part 15, Class A
• EN55022 Class A
• CE
• E55024 Immunity standard and ESD