E4BE4B
4
Speci fications
J RATINGS/CHARACTERISTICS
Part number E4B-TS50E4 E4B-T1E4 E4B-LS20E4 E4B-LS70E4 E4B-RS70E4
Sensing method Through-beam Distance setting Zone setti ng
Suppl y voltage 12 to 24 VD C ± 10% (10.8 to 26.4 VDC) with a max. ripple ±10% (p-p)
Current
consumption
12 VDC Emitter: 155 mA
max.
Receiver: 30 mA
max.
Emitter: 70 mA
max.
Receiver: 30 mA
max.
100 mA max.
24 VDC Emitter: 80 mA
max.
Receiver: 30 mA
max.
Emitter: 50 mA
max.
Receiver: 30 mA
max.
50 mA max.
Sensing distance 50 cm (19.69 in) 1 m (3.28 ft) 5to20cm
(1.97to7.87in)
20 to 60 cm
(20to70cm)
(See Note 1.)
(7.87into
23.62 i n)
20 to 60 cm
(20to70cm)
(See Note 1.) (in
10-cm divisi ons)
(7.87 to 23.62 in)
Standard sensing object 10 x 10 cm flat plate 4x4cmflatplate
Differential travel — 20% max. of sensing distance 3cmmax.
Directional angle (See Note 2.) ±8° max.
Ultrasonic oscillation frequency 200 kHz
Sw itching frequency (See Note 3.) 50 Hz 10 H z 50 H z 20 Hz
Response time 10 ms 50 ms 10 ms 25 ms
Operating mode N.O. or N.C. selectable
Control output NPN 100 mA at 30 VDC (with a residual voltage of 1.5 V max.) and an output resistance of 4.7 kΩ
PNP
Resi dual voltage 1.5 V max. under a l oad current of 100 mA
Indicators SENSING indicator (red LED) and STABILITY indicator (green LED )
Ultrasonic speed compensation No Yes
Ambient operating temperature -- 1 0 °Cto55°C(14°F to 131°F)
Relative humidity 35% to 95%
Temperature influence ±10% max. of sensing distance at 20°C(68°F) in the temperature range of --10°C and 55°C
(14°F to 131°F)
Voltage influence ±5% max. of sensi ng distance at a voltage between 90% and 110% of the rated power supply
voltage
Insulation resistance 20 MΩ min. at 500 VDC between current carry parts and case
Dielectric strength 1,000 V (50/60 Hz) for 1 min between current carry parts and case
Vi bration resistance 10 to 55 Hz, 1.5-mm double ampli tude for 2 hours each in X, Y, and Z axes
Shock resistance 500 m/s
2
(approx. 50G) 3 times each in X, Y, and Z axes
Enclosure rati ng IEC IP66 (water resistant)
Approvals UL, cUL Recogni zed, File N o. E41515 when used with a Class 2 pow er source
Weight (with 2-m-long cord and
Mounting Bracket)
Approx. 600 g (21 oz) w ith Emitter
and R eceiver
Approx. 300 g (10.6 oz)
Note: 1. These are the available sensing distances at an ambient temperature range between 0°C and 45°C(32°Fto113°F)
2. Signal attenuation of --6 dB.
3. The switching frequencies are values obtained with the E4B used for detecting a rotating propell er-shaped disc as shown
below.
Space:Blade = 1:1