Nominal Inductance
0.21 µH/ft
Impedance
Nominal Characteristic Impedance
40 Ohm
Delay
Nominal Velocity of Propagation (VP) [%]
66 %
Current
Max. Recommended Current [A]
1.45 Amps per conductor @ 25°C
Voltage
UL Voltage Rating
100 V RMS
Electrical Characteristics Notes: 2/c 25 AWG equivalent DCR when connected to a 3-pin XLR.
Temperature Range
Non-UL Temp Rating: 60°C
Operating Temp Range: -30°C To +60°C
Mechanical Characteristics
Bulk Cable Weight: 9 lbs/1000ft
Max Recommended Pulling Tension: 24 lbs
Min Bend Radius/Minor Axis: 1.25 in
Applicable Environmental and Other Programs
EU Directive Compliance: No
EU CE Mark: Yes
Suitability
Suitability - Indoor: Yes
Flammability, LS0H, Toxicity Testing
UL voltage rating: 100 V RMS
Plenum/Non-Plenum
Plenum (Y/N): No
Part Number
Variants
Item # Color Footnote
1804A U4F500 Beige U4F F
1804A J5C100 Black, Vivid Matte
1804A J5C500 Black, Vivid Matte F
1804A G8M500 Matte Yellow F
1804A G8M500 Matte Yellow F
Footnote: F - MAY CONTAIN MORE THAN 1 PIECE. MINIMUM LENGTH OF ANY ONE PIECE IS 50'.
© 2018 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without
notice, and the listing of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages
(including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief
at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product
Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and
regulations based on their individual usage of the product.
