In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
040706
www.littelfuse.com
POLYFUSE
®
RESETTABLE FUSES
Dimensions (mm)
Order Qty. Order- Model Packaging
Information Number
No. HVR600
HVR600P150C 0.15 0.30 600/60 3 5.00 @ 1.00 1.00 6.0 12.0 22.0 • •
HVR600P150C-RA 0.15 0.30 600/60 3 5.00 @ 1.00 1.00 7.0 10.0 20.0 • •
HVR600P150C-RB 0.15 0.30 600/60 3 4.50 @ 1.00 1.00 9.0 12.0 22.0 • •
HVR600P150CF 0.15 0.30 600/60 3 5.00 @ 1.00 1.00 6.0 12.0 22.0 • •
HVR600P160C 0.16 0.32 600/60 3 7.00 @ 1.00 1.00 4.0 10.0 18.0 • •
HVR600P160C-RA 0.16 0.32 600/60 3 9.50 @ 1.00 1.00 4.0 7.0 16.0 • •
HVR600P160C-R1 0.16 0.32 600/60 3 9.00 @ 1.00 1.00 4.0 8.0 17.0 • •
HVR600P160CF 0.16 0.32 600/60 3 7.00 @ 1.00 1.00 4.0 10.0 18.0 • •
cURus
TÜV
Model I
hold
I
Trip
V
max.
I
max.
max. time to trip P
d max.
Resistance Approvals
(A) V
int/AC
/V
op/DC
* (A) (s @ A)
(W) R
min.
()
R
max.
()
R
I max.
()
Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF).
NOTE:
I
hold
= Hold current: maximum current device will pass without tripping in 20 °C still air.
I
trip
=
Trip current: minimum current at which the device will trip in 20 °C still air.
I
max
= Maximum fault current device can withstand without damage at rated voltage (V
max
)
P
d
= Power dissipated from device when in the tripped state at 20°C still air.
R
min
= Minimum resistance of device in initial (un-soldered) state.
R
1max
= Maximum resistance of device at 20°C measured one hour after tripping for 20 sec.
Caution: Operation beyond the specifi ed rating may result in damage and possible arcing and fl ame.
Specifi cations are subject
to change without notice.
* V
int
:Interrupt Voltage V
op
: Operating Voltage(V dc)
Dimensions (mm)
Model A B C D E Physical Characteristics packaging quantity
Max Max typ Min Max Lead Material bag ammo
HVR600P150C 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P150C-RA 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P150C-RB 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P150CF 13,5 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 600
HVR600P160C 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
HVR600P160C-RA 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
HVR600P160C-R1 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
HVR600P160CF 16,0 12,6 5,1 4,7 6,0 0.65 dia Sn/Cu 200 500
Specifi cations
Packaging
A: bulk
F: tape and ammo
Materials
Insulating Material: Yellow Epoxy Polymer,
UL 94V0
Round Pins: Copper alloy, tin plated
Max. Device Surface Temperature in Tripped State
125 °C
Operating / Storage Temperature
-40 ºC to +85 ºC (consider de-rating)
Humidity Ageing
+85 °C, 85 % R.H., 1000 hours, ± 5 % typical
resistance change
Soldering Characteristics
Solderability per MIL-STD-202, Method 208E
Thermal Shock
MIL-STD-202F, Method 107G
+125 °C to -40 °C 10 times, ±5 % typical resistance
change
Solvent Resistance
MIL-STD-202, Method 215F, no change
Marking
“P”, voltage, amperage rating, lot number
High Voltage
PTC Device, 60 V / 600 V
Standard
UL 1434 1
st
Edition
CSA C22.2 No. 0 CSA TIL No. CA-3A
Approvals
cULus Recognition
TÜV
Features
This product line is designed to provide protec-
tion against induced AC power current, direct
power contact and the natural lightning strike.
The HVR600 product line is widely used in the
fi eld of telecommunications and network-
ing, ISDN and XSDN eguipment. It also helps
equipment manufacturers pass ITU K20, K21 and
telcordia requirements.
Devices are not intended for
continuous use at 250 V / 600 V!
Dimensions (mm)
