Low Ohmic - Current Sense Resistors
Type SBL Series
Literature No. 1773279
Issued: 04-05
Dimensions are shown for
reference purposes only.
Dimensions are in millimetres
unless otherwise specified.
Specifications subject to
change.
www.tycoelectronics.com
passives.tycoelectronics.com
Key Features
■ 4 Watts & 5 Watts Versions
■ Solid Metal Element
■ Non-Inductive
■ Low Temperature Coefficient
■ High Reliability
■ Custom Design
(Subject to Volume)
■ 4 Watt Device Available
in Distribution
Type SBL Series
The SBL Series is a low ohmic
non-inductive resistor with a low
temperature coefficient in a fully
insulated ceramic housing. It is
ideal for applications in power supply
regulation, motor control current
monitoring, feedback control loops,
overload sensors and radio frequency
applications. The solid metal element
has welded copper terminals and is
encapsulated in a ceramic housing,
filled with compressed silica sand.
Temperature Rise
Dimensions
Characteristics -
Electrical
Characteristics -
Mechanical
Climatic Category: -55 / 250 / 56
Temperature Range: -55°C to +250°C
Derating: Linear from 70°C to 250°C
Resistance Values (4 Watt): R005, R01, R015, R018, R022, R033, R047, R051
Resistance Values (5 Watt): R01, R015, R018, R022, R033, R047, R051
Resistance Tolerance: ±5%
Rated Dissipation (4 Watt): 4 Watts at 70°C
Rated Dissipation (5 Watt): 5 Watts at 70°C
Dielectric Strength: 2000 Volts
Insulation Resistance: < 10000 Mohms
Maximum Continuous Working Voltage: √Power x Resistance AC RMS
Characteristics -
Environmental
Resistance to Solder Heat: 260°C ( ∆R ± 0.2% typical)
Terminal Strength: 3lb pull test
Solderability: Meets MIL Std 202
Marking: Black ink on ceramic body - Manufacturer,
Resistance Value and Tolerance
SBL 4 R051 J
Common Part
4 - 4 Watts
5 - 5 Watts
Power Dissipation
R005, R01, R015, R018,
R022, R033, R047, R051
(5 Watt Version only
R01 - R051)
Resistance Value
Tolerance
SBL - Standard
J ±5%
F ±1%
How to Order
0 20 40 60 80 100 120 (%)
(K)
200
150
100
50
0
Temperature Rise
Power Rating
