OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HLMP-ED80-K0T00

P1-P3P4-P6P7-P9
Features
• Characterized by radiometric intensity
• High optical power output
• Extremely long useful life
• Low power consumption
• Well dened spatial radiation patterns
• 639 nm
PEAK
red color
• 30° viewing angle
• High operating temperature: T
jLED
= +130°C
• Superior resistance to moisture
• Suitable for outdoor use
Applications
• Photo sensor stimulus
• Infrared emitter replacement
• Solid state optical mouse sensors
• Surface imaging sensors
• Optical position and motion sensors
• Human interface devices
• Computer printer dot quality control
• Battery powered systems
Benets
• Radiometric LED characterization decreases system
variability
• Improved system reliability
• Visual styling
• Visible color for improved application safety
• On/o indication
• Suitable for a variety of sensor-based applications
Description
Radiometrically Tested Precision Optical Performance
AlInGaP II (aluminum indium gallium phosphide) LEDs
oer increased sensor-based application design exibility.
High-resolution radiometric intensity bins (mW/sr) enable
customers to precisely match LED lamp performance with
sensor functionality.
Visible LEDs oer new styling alternatives — light can be
leveraged to develop more attractive products. In com-
parison to invisible infrared sources, safety concerns are
signicantly improved by the human autonomic pupil
response and reexive movement away from bright light.
Visible LEDs further indidcate system on/o status.
The AlInGaP II technology provides extremely stable light
output over very long periods of time, with low power
consumption.
These lamps are made with an advanced optical grade
epoxy system oering superior high temperature and
moisture resistance performance in outdoor systems. The
epoxy contains both uv-a and uv-b inhibitors to reduce the
eects of long term exposure to direct sunlight.
Please contact your Avago Technologies Representative
for more information and design for manufacture advice.
Application Brief I-024 Pulsed Operating Ranges for AlInGaP
LEDs vs. Projected Long Term Light Output Performance and
other application information is available at: www.avago-
tech.com/go/led_lamps.
HLMP-ED80
Radiometrically Tested AlInGaP II LED Lamps
for Sensor-Based Applications
Data Sheet
2
Minimum Radiometric Intensity Maximum Forward Voltage
Part Number (mW/Sr) at 20 mA (V) at 20 mA
HLMP-ED80-K0T00 7.2 2.6
HLMP-ED80-K0000 7.2 2.4
Device Selection Guide
Package Dimensions
2.35 (0.093)
MAX.
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244)
NOTE:
ALL DIMENSIONS ARE IN mm (INCHES).
MIN.
0.70 (0.028)
MAX.
1.00
(0.039)
MIN.
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)
SQ. TYP.
CATHODE
LEAD
CATHODE
FLAT
8.71 ± 0.20
(0.343 ± 0.008
1.14 ± 0.20
(0.045 ± 0.008)
3
Part Numbering System
Mechanical Option
00: Bulk
V
F
Bin Selections
0: Maximum V
F
2.4 V
T: Maximum V
F
2.6 V
Maximum Intensity Bin
0: No maximum Iv bin limit
Minimum Intensity Bin
Refer to device selection guide
Color
D: 630 nm red
Package
E: T-1 3/4 (5 mm) round lamp
H L M P - x x x x - x x x x x
Absolute Maximum Ratings at T
A
= 25°C
DC Forward Current
[1,2,3]
..................................................................................................... 50 mA
Peak Pulsed Forward Current
[2,3]
.......................................................................................100 mA
Average Forward Current ....................................................................................................... 30 mA
Reverse Voltage (I
R
= 100 µA) .........................................................................................................5 V
LED Junction Temperature ........................................................................................................ 130°C
Operating Temperature .........................................................................................–40°C to +100°C
Storage Temperature ..............................................................................................–40°C to +100°C
Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents between
10 mA and 30 mA are recommended. For more information on recommended drive condi-
tions, please refer to HP Application Brief I-024 (5966-3087E).
3. Please contact your Avago sales representative about operating currents below 10 mA.
Note: Please refer to AB 5337 for complete information on part numbering system.
P1-P3P4-P6P7-P9

HLMP-ED80-K0T00

Mfr. #:
Buy HLMP-ED80-K0T00
Manufacturer:
Broadcom / Avago
Description:
Standard LEDs - Through Hole Red 30deg d 30deg
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet