Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.5 Vdc/16 A Output
Input Specifications
Parameter Min Typ Max Notes
Input Voltage
Vo, set≤3.63 V
Vo, set
>3.63 V
8.3 V
8.3 V
12 V
12 V
14 V
13.2 V
Input Current (full load) - - 11 A
Input Current (no load) - 100 mA -
Remote Off Input Current - 2 mA -
Input Reflected Ripple Current (pk-pk) - 30 mA -
Tested with one 1000 uF/25 V AL input
capacitor with ESR=0.03 ohm max and
6 × 47uF/16 V tan capacitors with
ESR=0.013 ohm max at 100 kHz, &
simulated source impedance of 1000
nH, 5 Hz to 20 MHz.
I
2
t Inrush Current Transient - 0.2 A
2
s 0.4 A
2
s
Turn-on Voltage Threshold - 7.8 V -
Turn-off Voltage Threshold - 7.3 V -
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Output Specifications
Parameter Min Typ Max Notes
Output Voltage Set Point -2% Vo,set - 2% Vo,set Vin=12 V, full load
Load Regulation - 0.4% Vo,set - Io=Iomin to Iomax
Line Regulation - 0.3% Vo,set - Vin=Vinmin to Vinmax
Regulation Over Temperature
(-40°C to +85°C)
- 0.4% Vo,set - Tref=Tamin to Tamax
Output Current 0 A - 16 A
Current Limit Threshold - 180% Io,out -
Short Circuit Surge Transient
- 1 A
2
s 3 A
2
s
Ripple and Noise (pk-pk) - 50 mV 100 mV
Ripple and Noise (rms) - 30 mV 45 mV
Tested with 0-20 MHz, 10 uF
Tantalum capacitor &1 uF
ceramic capacitor at the output
Turn on Time - 8 mS 20 mS
Overshoot at Turn on - - 1% Vo,set
0 uF - 5000 uF ESR≥10 mohm
Output Capacitance
0 uF - 1000 uF ESR≥1 mΩ
Transient Response
50% ~ 100% Max Load - 100 mV -
Settling Time - 80 uS -
100% ~ 50% Max Load - 100 mV -
Settling Time
All
- 80 uS -
di/dt=2.5 A/uS; Vin=12 V; and
with 330uF Tantalum
capacitors at the output
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.