NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
SHEET 1 OF 1
LDCFDLT_A
SCALE: 2:1
TITLE:
SIZE
DWG. NO.
REV
DO NOT SCALE DRAWING
ANGLES:
1
TOLERANCES:
.020 [0.50]-.200 [5.00]=
.008 [0.20]
.200 [5.00]-1.200 [30.00]=
.016 [0.40]
1.20 [30.0]-4.75 [120.0]=
.024 [0.60]
4.75 [120.0]-12.40 [315.0]=
.040 [1.0]
DRAWN:
ENGR:
DT:
DT:
MATERIAL:
FINISH:
PROJECTION:
:
THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
REVISIONS
REV
DESCRIPTION
DATE
APPV
B CJ
C
10-JUL-12
B.MURPHY
S.HOGAN
10-JUL-12
Add assembly instructions and heat shrink 1/8/10
CONSMA015
RECOMMENDED CABLE STRIPPING DIMENSIONS
SMA FEMALE BULKHEAD MOUNT CABLE
END CRIMP WITH O-RING FOR RG174 CABLE
SIDE VIEW
SOCKET
RECOMMENDED
MOUNTING HOLE
0.234
[6.00]
Ø0.256
[6.50]
Ø0.197
(5.00)
0.787
(20.00)
HEAT SHRINK
CRIMP RING
Ø0.154
(3.90)
0.374
(9.50)
0.020
[0.50]
0.065
[1.65]
NUT
1/4-36UNS-2B
THREADS
H0.315
[8.00]
Ø0.402
[10.20]
WASHER
0.055
(1.40)
Ø0.236
(6.00)
Ø0.358
(9.10)
O-RING
Descripon Material Finish
Body
Socket
Insulaon
Nickel
N/A
Gold
PTFE
Washer NickelBrass
Crimp Ring NickelBrass
O Ring RubberSI Rubber
Nut NickelBrass
Heat Shrink BlackPolyolefin
Brass
BE CU
0.177
(4.50)
0.134
(3.40)
0.098
(2.50)
RG-174 Cable
1. Solder the socket to the center conductor or crimp with 0.028” hex crimp tool.
4.
Slide heat shrink tubing over crimp ring and then heat.
2. Insert the socket, center conductor, and insulation into the body.
3.
Wrap the braid around the tail of the body and crimp the ring with a
0.128" hex crimp tool (or one labeled for use with RG-174 cable).
CONSMA015 ASSEMBLY INSTRUCTIONS
0.228
(5.80)
0.083
(2.10)
0.980
(24.90)
0.472
(12.00)
FLAT 0.228
(5.80)
Ø0.102
(2.60)
H0.433
(11.00)
1/4-36UNS-2A
THREADS
1/4-36UNS-2A
THREADS
0.587
(14.90)
Ø0.049
(1.24)
Ø0.024
(0.60)
PIN CHUCK
0.2x2x2 GROOVE
Ø0.020
(0.50)
C BPMUpdated dimensions; Added new title block 10-JUL-12
