DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
Drawing Number
13950
Date:
August
2016
© 2016 DESCO INDUSTRIES INC.
Employee Owned
Statshield
®
Foil Shielding Moisture Barrier Bag, .0040" (.1016mm)
STATSHIELD
®
FOIL MOISTURE BARRIER BAG WITH
IPC/JEDEC MOISTURE SENSITIVE CAUTION MARKINGS
Specifications:
Standard Document Meets Requirements of:
ANSI/ESD S541 (ANSI/ESD S20.20) ESD Protective Packaging
ANSI/ESD S11.4 Level 1 Technical Requirements
IPC/JEDEC J-STD-033C Packaging of Moisture/Reflow Sensitive Methods
Electrical Properties Typical Values Test Procedures/Method
Surface Resistance
(both exterior and interior) 1 x 10
4
to < 1 x 10
11
ohms ANSI/ESD STM11.11
Discharge Shielding <10 nJ ANSI/ESD STM11.31
Static Shielding 20 volts EIA 541
EMI Attenuation 45 db ANSI/ESD S541
Physical Properties Typical Values Test Procedures/Method
Film Thickness Nominal .0040" (.1016mm) ±10% MIL-STD-3010, 1003
Tensile Strength 13000 PSI ASTM D882
Puncture Resistance >25 PSI (lbs) MIL-STD-3010, 2065
Seal Strength >12 PSI ASTM D882
MVTR ≤0.0003/g/100sq.in/24hours ASTM F1249
Silicone Not detected FTIR
Marking Adhesion Pass IPC-TM-650 2.4.1
Made in the
United States of America
Abrasion Resistant
Coating
Static Dissipative
Polyester Layer
Barrier Layer
High Performance Static
Dissipative Polyethylene
Interior Layer
Specications and procedures subject to change without notice.
Statshield
®
bags are packaged 100 per package in an oversized shielding bag.
See Shielding Bag Storage at TB-7057.
Statshield
®
and Statfree
®
are Registered Trademarks of Desco Industries Inc.
See Bag Selection Chart Click HERE.
RoHS 2, REACH and Conflict Minerals Statement
None of the RoHS 2 restricted materials, REACH substances of very high concern as of 2016/06/20, or Conflict
Minerals are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and
Regulation (EC) No. 1907/2006/CE. See Desco Industries Inc. Limited Warranty at Desco.com.
ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
NOTE: The complete dry package concept of packaging
for electronics requires three elements:
Statshield
®
Moisture Barrier Bags - To Protect
Dessicant - To Absorb Moisture
Humidity Indicator Card - To Monitor Performance
For detailed instructions see Technical Bulletin TB-2031 -
Moisture Barrier Bags Application Instructions.
Date & Lot Code
Printed for QC
Traceablility
Side Weld Seal 3/8 in.
Weld
Seal
Soft Fold Bottom