AAAF5060QBDZGSEES Datasheet AAAF5060QBDZGSEES | P1-P3

SPEC NO: DSAL0955 REV NO: V.2B DATE: JUL/11/2012 PAGE: 1 OF 8

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201008311

5.0mm x 6.0mm SURFACE MOUNT LED LAMP

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Part Number: AAAF5060QBDZGSEES

Blue

Hyper Red

Green

Features

z Chips can be controlled separately.

z Suitable for all SMT assembly and solder process.

z Available on tape and reel.

z Package: 500pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Blue source color devices are made with InGaN on

Sapphire Light Emitting Diode.

The Hyper Red source color devices are made with Al-

GaInP on GaAs substrate Light Emitting Diode.

The Green source color devices are made with InGaN

on Sapphire Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

BLUE

RED

GREEN

SPEC NO: DSAL0955 REV NO: V.2B DATE: JUL/11/2012 PAGE: 2 OF 8

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201008311

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or

damage the internal circuitry.

4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.

4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.

4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup

and avoid damage during production.

5. As silicone encapsulation is permeable to gases, some corrosive substances such as H

S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

All design applications should refer to Kingbright application notes available at

http://www.KingbrightUSA.com/ApplicationNotes

SPEC NO: DSAL0955 REV NO: V.2B DATE: JUL/11/2012 PAGE: 3 OF 8

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201008311

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

3. Wavelength value is traceable to the CIE127-2007 compliant national standards.

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. Within 350mW at all chips are lightened.

Part No. Dice Lens Type

Iv (mcd) [2]

@ 30mA

iewing

Angle [1]

Min. Typ. 2θ1/2

AAAF5060QBDZGSEES

Blue (InGaN)

Water Clear

120 180

100

Hyper Red (AlGaInP) 200 300

Green (InGaN) 500 650

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength

Blue

Hyper Red

Green

468

630

515

nm I

F=20mA

λD [1] Dominant Wavelength

Blue

Hyper Red

Green

470

621

525

nm I

F=20mA

Δλ1/2 Spectral Line Half-width

Blue

Hyper Red

Green

nm I

F=20mA

C Capacitance

Blue

Hyper Red

Green

100

pF V

F=0V;f=1MHz

F [2] Forward Voltage

Blue

Hyper Red

Green

3.3

2.5

4.1

V IF=20mA

R Reverse Current

Blue

Hyper Red

Green

uA VR=5V

Parameter

Blue Hyper Red Green

Units

Power dissipation[2] 350 mW

DC Forward Current

30 30 30

Peak Forward Current [1]

150 195 150

Reverse Voltage 5 V

Operating Temperature -40°C To +85°C

Storage Temperature -40°C To +85°C

P1-P3 P4-P6 P7-P8

AAAF5060QBDZGSEES

Mfr. #:

Buy AAAF5060QBDZGSEES

Manufacturer:

Kingbright

Description:

Standard LEDs - SMD RGB 621/525/470nm 1300/1000/250mcd

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

AAAF5060QBDZGSEES