OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAX16832AASA+T

P1-P3P4-P6P7-P9P10-P10
General Description
The MAX16832A/MAX16832C step-down constant-cur-
rent high-brightness LED (HB LED) drivers provide a
cost-effective design solution for automotive
interior/exterior lighting, architectural and ambient light-
ing, LED bulbs, and other LED illumination applications.
The MAX16832A/MAX16832C operate from a +6.5V to
+65V input voltage range and can provide an output
current up to 700mA, if operated up to a temperature of
+125°C, or up to a 1A if operated up to a temperature
of +105°C. A high-side current-sense resistor adjusts
the output current, and a dedicated pulse-width modu-
lation (PWM) input enables pulsed LED dimming over a
wide range of brightness levels.
These devices are well suited for applications requiring
a wide input voltage range. The high-side current sens-
ing and an integrated current-setting circuitry minimize
the number of external components while delivering an
average output current with ±3% accuracy. A hysteretic
control method ensures excellent input supply rejection
and fast response during load transients and PWM dim-
ming. The MAX16832A allows 10% current ripple, and
the MAX16832C allows 30% current ripple. Both
devices operate up to a 2MHz switching frequency,
thus allowing the use of small-sized components.
The MAX16832A/MAX16832C offer an analog dimming
feature that reduces the output current by applying an
external DC voltage below the internal 2V threshold volt-
age from TEMP_I to GND. TEMP_I also sources 25µA to
a negative temperature coefficient (NTC) thermistor con-
nected between TEMP_I and GND, thus providing an
analog thermal-foldback feature that reduces the LED
current when the temperature of the LED string exceeds
a specified temperature point. Additional features
include thermal-shutdown protection.
The MAX16832A/MAX16832C operate over the -40°C to
+125°C automotive temperature range and are available
in a thermally enhanced 8-pin SO package.
Applications
Architectural, Industrial, and Ambient Lighting
Automotive RCL, DRL, and Fog Lights
Heads-Up Displays
Indicator and Emergency Lighting
MR16 and MR111 LED Lights
Features
o High-Efficiency Solution
o 6.5V to 65V Input Voltage Range
o Output Current Up to 1A
o On-Board 65V, 0.45Ω Power MOSFET
o Hysteretic Control: Up to 2MHz Switching
Frequency
o ±3% LED Current Accuracy
o 200mV Current-Sense Reference
o Resistor-Programmable Constant LED Current
o Integrated High-Side Current Sense
o Thermal-Foldback Protection/Linear Dimming
o Thermal-Shutdown Protection
o Available in a Thermally Enhanced 8-Pin SO
Package
o -40°C to +125°C Operating Temperature Range
MAX16832A/MAX16832C
2MHz, High-Brightness LED Drivers with
Integrated MOSFET and High-Side Current Sense
Ordering Information
LX
LXPGND
1
2
8
7
TEMP_I
DIMIN
GND
CS
3
4
6
5
MAX16832A
MAX16832C
L1
C2
ON
OFF
D1
HB LEDs
NTC
*
*
OPTIONAL
R
SENSE
V
IN
C1
Typical Application Circuit
19-4140; Rev 6; 7/12
1
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
EVALUATION KIT
AVAILABLE
+
Denotes a lead(Pb)-free/RoHS-compliant package.
*
EP = Exposed pad.
/V denotes an automotive qualified part.
PART TEMP RANGE
PIN-PACKAGE
MAX16832AASA+
-40°C to +125°C
8 SO-EP*
MAX16832AASA/V+
-40°C to +125°C
8 SO-EP*
MAX16832CASA+
-40°C to +125°C
8 SO-EP*
Pin Configuration appears at end of data sheet.
MAX16832A/MAX16832C
2MHz, High-Brightness LED Drivers with
Integrated MOSFET and High-Side Current Sense
2
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
IN
= +24V, V
DIM
= V
IN
, T
A
= T
J
= -40°C to +125°C, unless otherwise noted. Typical values are at T
A
= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-
layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial
.
IN, CS, LX, DIM to GND .........................................-0.3V to +70V
TEMP_I to GND .......................................................-0.3V to +6V
PGND to GND ......................................................-0.3V to +0.3V
CS to IN .................................................................-0.3V to +0.3V
Maximum Current into Any Pin
(except IN, LX, and PGND).............................................20mA
Continuous Power Dissipation (T
A
= +70°C)
8-Pin SO (derate 18.9mW/°C above +70°C)...........1509.4mW
Operating Temperature Range
700mA (max) Output Current ........................-40°C to +125°C
1A (max) Output Current ...............................-40°C to +105°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Soldering (reflow).............................................................+260°C
Lead Temperature (soldering, 10s) .................................+300°C
Pin-to-Pin ESD Ratings......................................................±2.5kV
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Voltage Range V
IN
6.5 65 V
Ground Current No switching 1.5 mA
Supply Current V
DIM
< 0.6V, V
IN
= 12V 350 µA
UNDERVOLTAGE LOCKOUT (UVLO)
V
CS
= V
IN
- 100mV, V
IN
rising until V
LX
<
0.5V
IN
6.25 6.5
Undervoltage Lockout UVLO
V
CS
= V
IN
- 100mV, V
IN
falling until V
LX
>
0.5V
IN
6.0
V
Undervoltage-Lockout Hysteresis 0.5 V
SENSE COMPARATOR
MAX16832A, V
IN
- V
CS
rising from 140mV
until V
LX
> 0.5V
IN
, V
DIM
= 5V
197 205 213
Sense Voltage Threshold High V
SNSHI
MAX16832C, V
IN
- V
CS
rising from 140mV
until V
LX
> 0.5V
IN
, V
DIM
= 5V
218 230 236
mV
MAX16832A, V
IN
- V
CS
falling from 260mV
until V
LX
< 0.5V
IN
, V
DIM
= 5V
185 190 198
Sense Voltage Threshold Low V
SNSLO
MAX16832C, V
IN
- V
CS
falling from 260mV
until V
LX
< 0.5V
IN
, V
DIM
= 5V
166 170 180
mV
Propagation Delay to Output High t
DPDH
Falling edge of V
IN
- V
CS
from 140mV to
260mV to V
LX
> 0.5V
IN
50 ns
Propagation Delay to Output Low t
DPDL
Rising edge of V
CS
- V
IN
from 260mV to
140mV to V
LX
< 0.5V
IN
50 ns
CS Input Current I
CSIN
V
IN
- V
CS
= 200mV, V
IN
= V
CS
3.5 µA
PACKAGE THERMAL CHARACTERISTICS (Note 1)
SO-EP
Junction-to-Ambient Thermal Resistance (θ
JA
)...............+53°C/W
Junction-to-Case Thermal Resistance (θ
JC
)......................+5°C/W
MAX16832A/MAX16832C
2MHz, High-Brightness LED Drivers with
Integrated MOSFET and High-Side Current Sense
3
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
INTERNAL MOSFET
V
IN
= V
DIM
= 24V, V
CS
= 23.9V,
I
LX
= 700mA
0.45 0.9
Drain-to-Source Resistance R
DSON
V
IN
= V
DIM
= 6.0V, V
CS
= 5.9V,
I
LX
= 700mA
12
Ω
LX Leakage Current I
LX_LEAK
V
DIM
= 0V, V
LX
= 65V 10 µA
DIM INPUT
DIM Input-Voltage High V
IH
V
IN
- V
CS
= 100mV 2.8 V
DIM Input-Voltage Low V
IL
V
CS
- V
IN
= 100mV 0.6 V
DIM Turn-On Time t
DIM_ON
V
DIM
rising edge to V
LX
< 0.5V
IN
60 ns
DIM Input Leakage High V
DIM
= V
IN
815µA
DIM Input Leakage Low V
DIM
= 0V -3 -1.5 0 µA
THERMAL SHUTDOWN
Thermal-Shutdown Threshold Temperature rising +165
o
C
Thermal-Shutdown Threshold
Hysteresis
10
o
C
THERMAL FOLDBACK
Thermal-Foldback Enable
Threshold Voltage
V
TFB_ON
V
DIM
= 5V 1.9 2.0 2.12 V
Thermal-Foldback Slope FB
SLOPE
V
DIM
= 5V 0.75 1/V
TEMP_I Output Bias Current I
TEMP_I
T
A
= +25
o
C 25 26.5 28 µA
ELECTRICAL CHARACTERISTICS (continued)
(V
IN
= +24V, V
DIM
= V
IN
, T
A
= T
J
= -40°C to +125°C, unless otherwise noted. Typical values are at T
A
= +25°C.)
EFFICIENCY
vs. INPUT VOLTAGE
MAX16832A toc01
V
IN
(V)
EFFICIENCY (%)
5545352515
75
80
85
90
95
100
70
565
1 LED
3 LEDs
5 LEDs
7 LEDs
9 LEDs
11 LEDs 13 LEDs
15 LEDs
9 LEDs
DUTY CYCLE
vs. INPUT VOLTAGE
MAX16832A toc02
V
IN
(V)
DUTY CYCLE (%)
5545352515
10
20
30
40
50
60
70
80
90
100
0
565
1 LED
3 LEDs
5 LEDs
7 LEDs
15 LEDs
13 LEDs
11 LEDs
FREQUENCY
vs. INPUT VOLTAGE
MAX16832A toc03
V
IN
(V)
FREQUENCY (kHz)
5545352515
50
100
150
200
250
300
350
400
450
500
0
565
1 LED
3 LEDs
5 LEDs
7 LEDs
9 LEDs
11 LEDs
13 LEDs
15 LEDs
16 LEDs
Typical Operating Characteristics
(V
IN
= V
DIM
= 48V, R
SENSE
= 0.3Ω, L = 220µH (connected between IN and CS). Typical values are at T
A
= +25°C, unless otherwise
noted.)
P1-P3P4-P6P7-P9P10-P10

MAX16832AASA+T

Mfr. #:
Buy MAX16832AASA+T
Manufacturer:
Maxim Integrated
Description:
LED Lighting Drivers Ic Led Drvr High Bright
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet