SFH610A, SFH6106
www.vishay.com
Vishay Semiconductors
Rev. 2.4, 27-Jun-16
1
Document Number: 83666
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, High Reliability, 5300 V
RMS
DESCRIPTION
The SFH610A and SFH6106 feature a high current transfer
ratio, low coupling capacitance and high isolation voltage.
These couplers have a GaAs infrared diode emitter, which
is optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 or SMD
package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6 and option 8. This version complies
with IEC 60950 (DIN VDE 0805) for reinforced insulation up
to an operation voltage of 400 V
RMS
or DC. Specifications
subject to change.
FEATURES
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 V
RMS
• High collector emitter voltage, V
CEO
= 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• DIN EN 60747-5-5 (VDE 0884) available with option 1
• CSA 93751
• BSI IEC 60950; IEC 60065
Note
• For additional information on the available options refer to option information.
E
C
A
C
1
2
4
3
ORDERING INFORMATION
SFH610x-#X0##T
PART NUMBER CTR
BIN
PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, BSI, CSA 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500
DIP-4 SFH610A-1 SFH610A-2 SFH610A-3 SFH610A-4 SFH610A-5
DIP-4, 400 mil SFH610A-1X006 SFH610A-2X006 SFH610A-3X006 SFH610A-4X006 -
SMD-4 SFH6106-1 SFH6106-2 SFH6106-3 SFH6106-4 SFH6106-5T
SMD-4, option 7 - - SFH610A-3X007 - -
VDE, UL, BSI, CSA (option 1) 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500
SMD-4, 400 mil, option 8 SFH610A-1X018T - - - -
10.16 mm
> 0.7 mm
7.62 mm
DIP-6
Option 7
9.27 mm
Option 8
Option 6