DIGI INTERNATIONAL WORLDWIDE HQ
877-912-3444 / 952-912-3444 / www.digi.com
DIGI INTERNATIONAL FRANCE
+33-1-55-61-98-98 / www.digi.fr
DIGI INTERNATIONAL JAPAN
+81-3-5428-0261 / www.digi-intl.co.jp
DIGI INTERNATIONAL SINGAPORE
+65-6213-5380
DIGI INTERNATIONAL CHINA
+86-21-50492199 / www.digi.com.cn
DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi
is always available to serve you with expert technical support and our industry
leading warranty. For detailed information visit www.digi.com/support.
© 1996-2017 Digi International Inc. All rights reserved.
All trademarks are the property of their respective owners.
SPECIFICATIONS
91002925
C2/417
RCM6600W | RCM6650W
FEATURES
MICROPROCESSOR
Rabbit® 6000 @ 162.5 MHz
NETWORK PERIPHERALS
10/100Base-T (Ethernet Signals only)
EMI REDUCTION
Spectrum spreader for reduced EMI (radiated emissions)
SERIAL FLASH MEMORY
(PROGRAM)
1 MB 4 MB
SRAM
1 MB
BATTERY-BACKABLE SRAM
32 KB (Internal) 32 KB (Internal), 1 MB (External)
BACKUP BATTERY
Connection for user-supplied backup battery (to support RTC)
GENERAL PURPOSE I/O
Up to 35 parallel digital I/O lines configurable with 4 layers of alternate functions, plus FIM (Flexible Interface Module) control
ANALOG INPUTS
0, 2 or 4-inputs shared with PE0, 1 or PE2, 3.12 bit resolution, 11 bits performance at up to 1 M sample/sec
(125 k sample/sec for any one input with no CPU overhead). Input range 100 mV to VCC-100 mV typical.
ADDITIONAL INPUTS
Reset in
ADDITIONAL OUTPUTS
Status, reset out
EXTERNAL I/O BUS
Can be configured for 8 data lines 8 address lines (shared with parallel I/O lines), plus I/O read/write
SERIAL PORTS
6 high-speed, CMOS-compatible ports: All 6 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI), and 2 as SDLC/HDLC
1 clocked serial port shared with programming port
SERIAL RATE
Maximum asynchronous baud rate = CLK/8
SLAVE INTERFACE
Slave port allows the module to be used as an intelligent peripheral device slaved to a master processor
REAL-TIME CLOCK
Yes
TIMERS
Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers, and one 16-bit timer with 4 outputs and
8 set/reset registers
WATCHDOG/SUPERVISOR
Yes
PULSE-WIDTH MODULATOR
4 channels synchronized PWM with 10-bit counter or 4 channels variable-phase or synchronized PWM with 16-bit counter
INPUT CAPTURE
2-channel input capture can be used to time input signals from various port pins
QUADRATURE DECODER
2-channel quadrature decoder accepts inputs from external incremental encoder modules
POWER
3.15 VDC (min.) - 3.45 VDC (max.)
625 mA @ 3.3 V while transmitting/receiving
85 mA @ 3.3 V while not transmitting/receiving
OPERATING TEMPERATURE
-30° C to +55° C
HUMIDITY
5% to 95%, non-condensing
CONNECTORS
Edge connectors for interface with 52-pin mini PCI Express socket
BOARD SIZE
1.20 in × 2.00 in × 0.40 in (30 mm × 51 mm × 10 mm)
WI-FI SPECIFICATIONS
TYPICAL AVERAGE ANTENNA
OUTPUT POWER
Americas, Japan: 802.11b: 19 dBm; 802.11g: 15 dBm
Other Regions: 802.11b: 18 dBm; 802.11g: 15 dBm
COMPLIANCE
802.11b/g, 2.4 GHz
DESCRIPTIONPART NUMBERS
20-101-1322 RCM6600W
20-101-1323 RCM6650W
101-1324 RCM6600W Deluxe Development Kit
101-1325 RCM6600W Standard Development Kit