KMP_2300C_B05 Page 4 of 4
2300 Series
Bobbin Wound Surface Mount Inductors
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without
notice. © 2011 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/support
TAPE & REEL SPECIFICATIONS
REEL OUTLINE DIMENSIONS
18.4 (0.724) Max.
†
11.9-15.4
(0.469-0.606)*
12.4-12.6
(0.488-0.496)
†
13.50
12.80
0.531
0.504
ØØ
1.50 (0.059) Min.
R50 (1.97) Min.
Ø20.20 (Ø0.795) Min.
100 (3.937)
Min.
Leader Section
400 (15.748) Min.
Goods
Enclosure
Section
Trailer Section
160 (6.299) Min.
Ø330.5 (13.012) Max.*
All dimension in mm (inches)
* Includes fl ange distortion at outer edge
† Measured at hub
