Reflow Soldering Conditions
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
3 s
1 time
350
(MAX.)
(MAX.)
(MAX.)
Single Color Right Angle Type (2.1 X 1.0 mm)
1113F Series
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
Page 13
2010.7.31
2007.8.31
Single Color Right Angle Type (2.1 X 1.0 mm)
1113F Series
Page 14
Reliability Testing Result
Failure Criteria
Reliability Testing
Result
Applicable Standard Testing Conditions Duration Failure
Room Temp.
Operating Life
EIAJ ED-
4701/100(101)
Ta = 25
, I
F
= Maxium Rated Current 1,000 h 0/25
Resistance to
Soldering Heat
EIAJ ED-
4701/300(301)
Pre-heating : 150
180
120s Max.
Operation Heating : 230
40s Max.
Peak Temperature : 260
Twice 0/25
Temperature Cycling
EIAJ ED-
4701/100(105)
Minimum Rated Storage Temperature(30min)
Normal Temperature(15min)
Maximum Rated Storage Temperature(30min)
Normal Temperature
(
15min
)
5 cycles 0/25
Wet High Temp.
Storage Life
EIAJ ED-
4701/100(103)
Ta = 60
±
2
, RH = 90
±
5% 1,000 h 0/25
High Temp.
Storage Life
EIAJ ED-
4701/200(201)
Ta = Maximum Rated Storage Temperature 1,000 h 0/25
Low Temp.
Storage Life
EIAJ ED-
4701/200(202)
Ta = Minimum Rated Storage Temperature 1,000 h 0/25
Vibration,
Variable Frequency
EIAJ ED-
4701/400(403)
98.1m/s
2
(10G), 100
2KHz sweep for 20min.,
XYZ each direction
2 h 0/10
Items Symbols Conditions Failure criteria
Luminous Intensity Iv
I
F
Value of each product
Luminous Intensity
Testing Min. Value
Spec. Min. Value x 0.5
Forward Voltage V
F
I
F
Value of each product
Forward Voltage
Testing Max. Value
Spec. Max. Value x 1.2
Reverse Current I
R
V
R
= Maximum Rated
Reverse Voltage V
Testing Max. Value
Spec. Max. Value x 2.5
Cosmetic Appearance - -
Occurrence of notable decoloration,
deformation and cracking
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
Single Color Right Angle Type (2.1 X 1.0 mm)
1113F Series
Page 15
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice.
Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please
adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in
this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,”
it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
2007.8.31

FY1113F-TR

Mfr. #:
Manufacturer:
Description:
LED Uni-Color Yellow 592nm 2-Pin SMD T/R
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union