PC844X Series
1. Recognized by UL1577, file No. E64380 (as model
No. PC844)
2. Package resin : UL flammability grade
(94V-0)
■ Features
■ Agency approvals/Compliance
1. Programmable controllers
2. Telephone sets, telephone exchangers
3. System appliances
4. Signal tranmission between circuits of different poten-
tials and impedances
■ Applications
DIP 16pin (4-channel)
AC Input Photocoupler
1. 16pin DIP 4-channel package
2. Double transfer mold package (ldeal for Flow Solder-
ing)
3. AC input type
4. High collector-emitter voltage (V
CEO
: 80V
(*)
)
5. Current transfer ratio
(CTR : MIN. 20% at I
F
=±1mA, V
CE
=5V)
6. High isolation voltage between input and output
(V
iso(rms)
: 5.0kV)
(*) Up to Date code "P7" (July 2002) V
CEO
: 35V.
From the production Date code "J5" (May 1997) to "P7" (July
2002), however the products were screened by BV
CEO
≥70V.
∗
1-channel package type is also available.
(model No. PC814X Series)
■ Description
PC844X Series contains an IRED optically coupled
to a phototransistor.
It is packaged in a 4-channel 16pin DIP.
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V
(*)
and CTR is 20%
to 300% at input current of ±1mA.
1
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
PC844X Series
Sheet No.: D2-A03602EN
Date Mar. 26. 2004
© SHARP Corporation
