SPEC NO: DSAF2437 REV NO: V.3 DATE: MAR/10/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101005270
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1.Wavelength: +/-1nm.
Notes:
1. 2mm below package base.
2. 5mm below package base.
Part No. Dice Lens Type
iewing
Angle [1]
Min. Typ. 2θ1/2
WP7113SRD5V Super Bright Red (GaAlAs) RED DIFFUSED 220 320
30
°
Iv (mcd) [2]
V= 5V
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Red 660
nm V
F=5V
λD [1] Dominant Wavelength Super Bright Red 640
nm V
F=5V
Δλ1/2 Spectral Line Half-width Super Bright Red 20
nm V
F=5V
I
F Forward Current Super Bright Red 13 17.5 mA VF=5V
I
R Reverse Current Super Bright Red
10 uA VR = 5V
Parameter Super Bright Red Units
Power dissipation 85 mW
Forward Voltage 6 V
Reverse Voltage 5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
