1.35V DDR3L SDRAM RDIMM
MT18KSF51272PDZ – 4GB
MT18KSF1G72PDZ – 8GB
Features
• DDR3L functionality and operations supported as
defined in the component data sheet
• 240-pin, registered dual in-line memory module
(RDIMM)
• Fast data transfer rates: PC3-12800, PC3-10600
• 4GB (512 Meg x 72), 8GB (1 Gig x 72)
• V
DD
= 1.35V (1.283–1.45V)
• V
DD
= 1.5V (1.425–1.575V)
• Backward compatible to V
DD
= 1.5V ±0.075V
• V
DDSPD
= 3.0–3.6V
• Supports ECC error detection and correction
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Dual-rank
• On-board I
2
C temperature sensor with integrated
serial presence-detect (SPD) EEPROM
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Gold edge contacts
• Halogen-free
• Fly-by topology
• Terminated control, command, and address bus
Figure 1: 240-Pin RDIMM (MO-269 R/C B1)
Module height: 30mm (1.181in.)
Figure 2: 240-Pin RDIMM (MO-269 R/C B1)
Module Height: 30mm (1.181in.)
Options Marking
• Operating temperature
– Commercial (0°C ≤ T
A
≤ +70°C) None
• Package
– 240-pin DIMM (halogen-free) Z
• Frequency/CAS latency
– 1.25ns @ CL = 11 (DDR3-1600) -1G6
– 1.5ns @ CL = 9 (DDR3-1333) -1G4
Table 1: Key Timing Parameters
Speed
Grade
Industry
Nomenclature
Data Rate (MT/s) t
RCD
(ns)
t
RP
(ns)
t
RC
(ns)CL = 11 CL = 10 CL = 9 CL = 8 CL = 7 CL = 6 CL = 5
-1G6 PC3-12800 1600 1333 1333 1066 1066 800 667 13.125 13.125 48.125
-1G4 PC3-10600 – 1333 1333 1066 1066 800 667 13.125 13.125 49.125
-1G1 PC3-8500 – – – 1066 1066 800 667 13.125 13.125 50.625
-1G0 PC3-8500 – – – 1066 – 800 667 15 15 52.5
-80B PC3-6400 – – – – – 800 667 15 15 52.5
4GB, 8GB (x72, DR) 240-Pin 1.35V DDR3L RDIMM
Features
PDF: 09005aef83ad1130
ksf18c512_1gx72pdz.pdf – Rev. K 10/14 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2009 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.