GU256X128E-3900B Hardware Specification
- 5 -
4 Environmental Specifications
Operating temperature: −40 to +70 ºC
Storage temperature: −40 to +85 ºC
Storage humidity: 20 to 80 % R.H (Non Condensing)
Vibration (non-operating): 10-55-10Hz, all amplitude 1mm, 30 minutes, X-Y-Z
Shock (non-operating): 392m/s
2
(40G) 9ms X-Y-Z, 3 times each direction
5 Optical Specifications
Luminance: 350cd/m
2
Min. (500cd/m
2
Typ.)
Color of illumination: Green (Blue Green)
6 Physical Specifications
Number of dots: 32,768 (256 × 128)
Display area: 140.65mm x 70.25mm(X x Y)
Dot size: 0.4mm × 0.4mm (X × Y)
Dot pitch: 0.55mm × 0.55mm (X × Y)
Weight: Approximately 630g
7 Applicable Specifications
Applicable VFD Module reliability specification : TT-99-3102
Applicable VFD Module quality specification : TT-98-3413
Applicable VFD quality specification : TT-93-3336D
8 Interface
Parallel and RS-232 Serial interfaces are available on this module.
8.1 Interface timing
8.1.1 Parallel interface timing 1 (Not applicable for bit image data transfer in DMA mode)
Note: RDY=0 (BUSY) is output after every byte.
Internal receive buffer capacity is 256 bytes. After data is input, RDY signal is immediately set to
RDY=0 (BUSY) until the received byte is stored to the receive buffer. If the internal receive buffer is
full, RDY signal will remain BUSY until space for 1 byte becomes available. The required time for
this varies, depending on the type of commands and rate at which data is input. The RDY signal
should always be checked before writing data.