Datasheet for part number CA02L12SA10SB
Our Catalog Part Number: CA02L12SA10S-B
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet Connector with bayonet coupling
Shell Style Box mounting receptacle
Gender Socket
Shell Size 12S
Contact Arrangement 12SA10
Number of contacts 4 contacts size 16S
Contact Type Solder Cup
Contact Plating Hard silver
Shielding no
Contact Rating at +20 °C (68 °F)
(Size 15/15S/16/16S)
22 A
Contact Resistance
(Size 15/15S/16/16S)
6 mΩ
Operating Voltage
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Insulator Resistance
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Test Voltage 1050 Vrms
Air and Creepage Paths (Min) 0,7 mm
Ambient Temperature
Standard insulator material -55°/+125°C
(-67/257°F)
Safety Provisions
IP67 acc. to DIN 40 050
(1 bar pressure after 12 hrs)
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact
(Size 15/15S/16/16S)
1,0 N
Gage
For infos on Gage please see catalog
VG95234, part 1
Coupling Torque Closing: 2,5 Nm max / Opening: 0,23 Nm min
Contact Retention
(Size 15/15S/16/16S)
35 N
Shell Material Aluminium alloy
Shell Plating Olive drab chromate over cadmium plating
Insulator and Gromet Material CR-Elastomere
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping
(Size 15/15S/16/16S)
6,2 mm
General Info
All tests in accordance with VG95319 and/or if
applicable with VG95210
Specifications and dimensions subject to change.
Page 1 of
