Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Radial Lead
NPCAP
TM
-PSCSeries
・
Super low ESR, high ripple current capability
・
Rated voltage range : 2.5 to 16V
dc
・
Nominal capacitance range : 270 to 2,700μF
・
Endurance : 15,000 hours at 105
℃
・
Suitable for DC-DC converters, voltage regulators and decoupling applications
for computer motherboards
・
Added 2.5V 820μF (ESR 5m
Ω
max.)
・
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・
RoHS2 Compliant
・
Halogen Free
◆
SPECIFICATIONS
Items Characteristics
Category
Temperature Range
-55 to +105
℃
Rated Voltage Range
2.5 to 16V
dc
Capacitance Tolerance
±
20% (M) (at 20
℃
, 120Hz)
Surge Voltage
Rated voltage
×
1.15 (at 105
℃
)
Leakage Current
*Note
I=0.2CV or 500μA, whichever is greater.
Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V
dc
) (at 20
℃
after 2 minutes)
Dissipation Factor
(tan
δ
)
0.10 max.
(at 20
℃
, 120Hz)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Z(-25
℃
)/Z(+20
℃
)
≦
1.15
Z(-55
℃
)/Z(+20
℃
)
≦
1.25
(at 100kHz)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after the rated voltage is applied for 15,000 hours
at 105
℃
.
Appearance No significant damage
Capacitance change
≦±
20% of the initial value
D.F. (tan
δ
)
≦
150% of the initial specified value
ESR
≦
150% of the initial specified value
Leakage current
≦
The initial specified value
Bias Humidity Test
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after subjecting them to DC voltage at 60
℃
,
90 to 95% RH for 1,000 hours.
Appearance No significant damage
Capacitance change
≦±
20% of the initial value
D.F. (tan
δ
)
≦
150% of the initial specified value
ESR
≦
150% of the initial specified value
Leakage current
≦
The initial specified value
Surge Voltage Test
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105
℃
for 30 seconds
through a protective resistor(R=1k
Ω
) and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change
≦±
20% of the initial value
D.F. (tan
δ
)
≦
150% of the initial specified value
ESR
≦
150% of the initial specified value
Leakage current
≦
The initial specified value
Failure Rate
0.5% per 1,000 hours maximum (Confidence level 60% at 105
℃
)
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
◆
DIMENSIONS [mm]
Size code
φD
φd
F
φD'
L'
H08
8.0
0.6
3.5
L+1.0max.
HB5
8.0
0.8
(Note1)
3.5
JB5
10.0
0.8
(Note1)
5.0
JC5
10.0
0.6
5.0
L+1.5max.
φD+0.5max.
Note1 : 0.6 for rated volt 16V.
Coated Case
L'
15min. 4min.
φD'
φd
F
±
0.5
Longer life
Downsizing
PSC
PSE P2-42
◆
MARKING
C
3D6
820
2.5
V
2-44
CAT. No. E1001R
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
