P/N 1330-20-1-0500-0XX-1-TS
(Conductor: Tinned strands) (Insulation: FEP Material)
UL1330 - FEP Insulated Hook-Up Wire 200°C 600V
(20 AWG)
CONSTRUCTION:
Tinned Strands, copper conductor, 7/0.32 mm strands.
Overall Diameter = 2.05 mm ± 0.10 mm
Insulation Thickness: 0.51 mm
CERTIFICATION & APPROVALS:
UL RATED AWM: Can be used in the USA.
UL Subject 758 UL FILE NO:E108485
Printed Markings:
“
AWM 1330 200℃ 600V E108485 20AWG REIHSING VW-1
”
Passes UL VW-1 Vertical Flame Test.
PHYSICAL
&
ELECTRICAL PROPERTIES:
Rated Temperature: 200
℃
~ -80
℃
Rated Voltage: 600V
Insulation Potential Strength: 2000 VAC/min
Flexibility: hard FEP material, is slightly more rigid than
PVC insulation material.
Maximum Conductor Resistance: 39.5Ω/km
Resistant to: Chemical solvents, abrasion, cutting,
extremes of hot & cold, flexing, shock, compression.
APPLICATIONS:
FEP wire, has good resistance to extremes of temp.,
compression and repeat flexing. Suitable for use in whole
sealed cooking appliances, auto headlamps, internal
combustion engine and mercury switches, when shock or
sharp casing edges are a “wear and tear” factor.
PACKAGING: 500ft per reel.
ENVIRONMENTAL APPROVALS:
Conforms to all current RoHS directives as laid out in EU
Directive 2011/65/EC. Current SGS reports for this wire
are available upon request.
P/N's & COLORS
1330-20-1-0500-001-1-TS
BLACK
1330-20-1-0500-002-1-TS
WHITE
1330-20-1-0500-003-1-TS
YELLOW
1330-20-1-0500-004-1-TS
RED
1330-20-1-0500-005-1-TS
BLUE
1330-20-1-0500-006-1-TS
BROWN
1330-20-1-0500-007-1-TS
GREEN
1330-20-1-0500-008-1-TS
ORANGE
1330-20-1-0500-010-1-TS
VIOLET
1330-20-1-0500-012-1-TS
GRAY
