Data Sheet ADP198
Rev. G | Page 7 of 16
1
VOUT
NOTES
1. THE EXPOSED
P
AD IS CONNECTED
T
O THE SUBSTRA
TE OF THE
ADP198
AND MUST BE CONNECTED
TO GROUND.
2
VOUT
3GND
4SEL1
8
VIN
7 VIN
6 EN
5 SEL0
TOP VIEW
ADP198
(Not to Scale)
09484-005
Figure 5. 8-Lead LFCSP Pin Configuration
Table 5. Pin Function Descriptions, LFCSP
Pin No. Mnemonic Description
1 VOUT Output Voltage. Connect Pin 1 and Pin 2 together.
2 VOUT Output Voltage. Connect Pin 1 and Pin 2 together.
3 GND Ground.
4 SEL1 Select Turn-On Time.
5 SEL0 Select Turn-On Time.
6 EN Enable Input. Drive EN high to turn on the switch and drive EN low to turn off the switch.
Input Voltage. Connect Pin 7 and Pin 8 together.
8 VIN Input Voltage. Connect Pin 7 and Pin 8 together.
EP Exposed Pad. The exposed pad is connected to the substrate of the ADP198 and must be connected to ground.