MENB1030A2440N01 Datasheet MENB1030A2440C01, MENB1030A2440F01, MENB1030A2440N01 | P1-P2

______________________________________________________________________________________________________________________________ 1 of 2

SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com

RoHS

Specifications

All Specifications are typical at nominal input, full load at 25

C unless otherwise stated.

AC Input 100-240VAC, -/-10%, 47-63 Hz, 1

∅

MTBF

100,000 hours calculated

Input Current

100VAC: 0.9A

Hold

up Time

18 ms min. @ 115VAC, 60 msec @ 230VAC

Inrush Current

60A peak, 264Vac, cold start

urn

on Time

2 seconds, max.

Input Fuse

3.15A Internal Primary Current Fuse is provided

Topology

Switching – Fixed Frequency Flyback

Efficiency

Meets EISA2007, CEC Efficiency Level V,

and EU(EC) No. 278/2009 Phase II requirements

Overload Protection

Hiccup Mode

Output Voltage

See chart

Short Circuit Protection

Hiccup Mode

Output Power

See chart

EMC

See chart below

Ripple and Noise

1% pk-pk max., 20MHz BW

Safety Standards

EN/IEC/CSA/UL60601-1

Line & Load Voltage Regulation

Line: +/- 1%, Load: +/-5%

Dielectric Withstand

Input-Output: 5,656VDC, Input-GND: 1,500 Vac,

Output-GND: 500Vdc

Transient Response

500µs max., 50% load step, typical

Operating Temperature 0

to 40

C, no derating

Minimum Load

Not required

Storage Temperature -30 to +85

Case Material:

Black 94V0 Polycarbonate

lative Humidity

5% to 95%, non-condensing

Case Dimensions:

95 x 54 x 31mm. See outline drawing

Weight = 200g

Altitude

0 to 10,000 ft

Output

onnector:

2.5mm barrel type (Ault #3) connector,

center contact (+). Other options available

Output C

able

5V – 9V models:

18AWG (SPT-1), 1,500mm, 2 conductor

12V – 24V models: #18AWG (UL1185), 1,500mm, 2 conductor

EMC Specifications

Conducted Em

issions

EN55011 Class B, FCC Part 15, Class B.

Radiated Emissions

EN55011 Class B, FCC Part 15, Class B.

Line Frequency Harmonics

EN61000-3-2, Class A

Voltage Fluctuations/Flicker

EN61000-3-3

Static Discharge Immunity

EN61000-4-2, 6kV Contact Discharge, 8kV air discharge

Radiated RF Immunity

EN61000-4-3, 3V/m.

EFT/Burst Immunity

EN61000-4-4, 2kV/5kHz.

Line Surge Immunity

EN61000-4-5, 1kV differential, 2kV common-mode

Conducted RF Immunity

EN61000-4-6, 3Vrms

Power Frequency Magnetic Field Immunity

EN61000-4-8, 3A/m

Voltage Dip Immunity

EN61000-4-11, Criteria A

MENB1030

Medical Switch-Mode Power Supply

3 Year Warranty

Universal 30 Watt Series

•

100-240VAC Universal Input

•

Meets EISA2007, CEC Efficiency Level V,

EU (EC) No 278/2009 Phase II

•

Certified to UL/EN60601-1

•

5V to 48V outputs, up to 32W

•

Modified and Custom Designs Available

•

Regulated Output with Low Ripple

•

Impact-Resistant Polycarbonate Enclosure

•

No load Power Consumption <0.3W

•

Desktop & Wall Plug Styles

______________________________________________________________________________________________________________________________ 2 of 2

SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com

Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max)

MENB1030A0503F01 5 V 4.00 A 20.0 W 50 mV

MENB1030A0703F01 7.5 V 3.00 A 22.5 W 75 mV

MENB1030A0903F01 9 V 3.00 A 27.0 W 90 mV

MENB1030A1203F01 12 V 2.50 A 30.0 W 120 mV

MENB1030A1403F01 14 V 2.10 A 29.4 W 140 mV

MENB1030A1503F01 15 V 2.00 A 30.0 W 150 mV

MENB1030A1803F01 18 V 1.67 A 30.0 W 180 mV

MENB1030A2403F01 24 V 1.33 A 31.9 W 240 mV

MENB1030A4803F01 48 V 0.63 A 30.0 W 480 mV

Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.

Model "A" = Original Configuration

Product Family: "M" = Medical, "E" = External, "NB" = Model Series Designator

Output Pow er: "030" = 30 Watts

# of Outputs "1" = Single Output

"01" = Standard. "02" and higher indicates a modified model.Model

Output Voltage: "05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.

Input Connector: "F" = IEC320 C14 grounded, Other options available, see below

Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory.

Model Number Key

03MENB 011

030

A F

IEC320 - C14 IEC320 - C18 IEC320 - C8 N. Am erica N. America Europe United Australia

Class I Class II Class II Japan Japan Kingdom

Grounded

Ungro unde d

"Shaver"

Int e rc ha nga ble

Fixed Fixed Fixed Fixed

(F)

(Q)

(N)

(C)

(B)

(M)

(G)

(H)

Notes:

1. Ault #3 Connector, center contact (+).

2. Connector is Switchcraft 760 plug or equivalent.

Mating connector is Switchcraft 712A or equivalent.

3. Other connector options are available. Contact your local

SL Pow er Representative for details.

Output Connector

the receptacle chos en. The N. A. blade version (C) will be an interchangeable blade.

3. Blade Kit is available w hich w ill include one each of a EU, UK, and Australian blade. Kit part #

2. For Wall-Plug options, choose the applicable letter above and the unit w ill be fitted w ith

is KT1027K. The se can be used with the (C) version, to allow blades to be changed.

The other options (B), (M), (G), and (H) w ill be fixed blades molded in the case.

AC Input Receptacle Options

Desktop

1. For desktop options, choose applicable letter above.

Wall-Plug

Desktop Style Wall-plug Style (“B” Option Shown)

However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.

Outline Drawings

DATE

CODE

DATE

CODE

Medical Switch-Mode Power Supply

3 Year Warranty

MENB1030

Universal 30 Watt Series

P1-P2

MENB1030A2440N01

Mfr. #:

Buy MENB1030A2440N01

Manufacturer:

Description:

AC/DC DESKTOP ADAPTER 24V 30W

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

MENB1030A2440N01

MENB1030A2440N01

Products related to this Datasheet