10-2-02
SB02295
Ferrule Type, Fast-Acting Fuses KTQ
For 13/32” x 1-3/8” (10.3mm x 35mm)
Form No. KTQ
Page 1 of 1
Data Sheet: 2045
Bussmann
®
100
10
1
.1
.01
AMPERE
RATING
1
1-6/10
4
TIME IN SECONDS
10
100
1
10
100
1
RMS SYMMETRICAL CURRENT IN AMPERES
2
3
5
Time-Current Characteristic Curves–Average Melt
(Full Size Curves Available)
Electrical Ratings (Catalog Symbol and Amperes)
600 Volts AC
KTQ-1 KTQ-4
KTQ-1-6/10 KTQ-5
KTQ-2 KTQ-6
KTQ-3
Dimensional Data
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clear-
ly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any prod-
ucts and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected,
it should be tested by the user in all possible applications.
• For control, gaseous vapor fixture, and HID ballast;
electronic circuits.
• Melamine cartridge.
• Slightly more delay than type BBS to override transient
currents.
• Mounts in Buss panel-mount fuseholders HPS-L,
BM-series blocks, or 13/32” clips.
Test Specifications
Load Opening Time
110% Indefinitely
135% 1 hr. (max.)
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
Catalog Symbol: KTQ
Ferrule Type, Fast-Acting
1-6A
600Vac
Agency Information:
UL Recognized, STD 248-14, (Guide # JDYX2,
File E19 180)
Interrupt Rating: 10,000A RMS Sym.
Body Material: Melamine
Ferrule Material:Bronze
Ferrule Plating: Nickel
Recommended fuseblocks/fuseholders for
13/32” x 1-1/2” fuses
See Data Sheets listed below
• Open fuseblocks - 1104, 2104
• Finger-safe fuseholders - 1109, 1102, 1103, 1151
• Panel-mount fuseholders - 2114, 2113, 2108,
2112, 2109, 2140
• In-line fuseholders - 2127, 2126
Recommended Replacement is the BBS Series.
See Data Sheet # 2010 for Specifications.
