OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CPC1965Y

P1-P3P4-P6
I
NTEGRATED
C
IRCUITS
D
IVISION
www.ixysic.com
4
R07
CPC1965Y
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Load Current (mA
rms
)
400
500
600
700
800
900
1000
1100
1200
Typical Maximum Load Current
vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Blocking Voltage (V
P
)
750
800
850
900
950
1000
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Leakage (PA)
180
200
220
240
260
280
Typical Leakage vs. Temperature
(V
L
=600V
P
)
Maximum Surge Current
(Non-Repetitive)
(T
J
=50ºC max)
Pulse Duration (ms)
Peak Surge Current (A)
16 50 100
12
10
8
6
4
2
0
I
NTEGRATED
C
IRCUITS
D
IVISION
CPC1965Y
www.ixysic.com
5
R07
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1965Y MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1965Y 245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
I
NTEGRATED
C
IRCUITS
D
IVISION
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1965Y-R07
©Copyright 2013, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
10/18/2013
For additional information please visit our website at: www.ixysic.com
CPC1965Y
6
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
6.350 ± 0.127
(0.250 ± 0.005)
5.944 ± 0.127
(0.234 ± 0.005)
19.202 ± 0.381
(0.756 ± 0.015)
3.302 ± 0.051
(0.130 ± 0.002)
Pin 1
Pin 8
0.254 ± 0.013
(0.010 ± 0.0005)
2.642 ± 0.127
(0.104 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
2.540 ± 0.127
(0.100 ± 0.005)
5.08 ± 0.127
(0.200 ± 0.005)
10.160 ± 0.127
(0.400 ± 0.005)
0.711 ± 0.102
(0.028 ± 0.004)
0.800 DIA. x4
(0.031 DIA. x4)
2.540
(0.100)
Pin 1
10.160
(0.400)
5.080
(0.200)
1.30
(0.051)
PCB Hole Pattern
CPC1965Y
P1-P3P4-P6

CPC1965Y

Mfr. #:
Buy CPC1965Y
Manufacturer:
Description:
Triac & SCR Output Optocouplers 600V, 1mA AC Solid State Relay
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet