■ Accessories
(Sold Separately)
Lock Levers
XG5Z-0002
Can be used to lock XG8W Double-row
Right-angle Terminal Plugs to XG4M Flat
Cables and XG5M-N Discrete-wire IDC
Connectors.
They cannot be used with XG8W Double-
row Straight Terminal Plugs or XG8V Sin-
gle-row Plugs.
Mounting the Lock Lever
Insert the tab on the Lock Lever into the
hole on a Socket with a polarity guide. In
this way, it can be locked with XG8W Right-
angle Terminal Plugs.
■ Precautions
Correct Use
Dividing the XG8W (with
Straight Terminals), XG8V,
XG8A, and XG8B
• Using a Cutter, make a cut on the slot as
indicated by the dotted line in the dia-
gram. Then fold the Plug manually in the
direction of the arrows.
Automated Soldering
Conditions (Jet Flow)
1. Soldering temperature: 250 ±5°C
2. Continuous soldering time: Within 5±1 s
■ Ordering
Procedure
• Contact your OMRON representative if
you require a product with a non-standard
number of contacts.
Model
XG5Z-0002
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Cat. No. G043-E1-03
0816(0412)(O)
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company
Contact: www.omron.com/ecb