XG8Original Plugs
1
Original Plug that can be used in a wide
range of applications.
■ Can use as a Plug for different Sockets.
Applicable Sockets:
XG4M Flat Cable Connector
XG5 Discrete-wire IDC Connector
(Refer to Applicable Sockets below.)
■ Through-holes handle 0.8-mm wires.
■ With Double-row Plugs with right-angle terminals,
block-base soldering improves productivity while
lock levers simplify locking (excluding XG8V and
XG8W Plugs with straight terminals).
■
Simply cut to divide (excluding XG8W Right-angle Plugs).
■ Standard models are approved by UL standards
(file No. E103202)
■ Connectors
For MIL Connectors
■ Ratings and Characteristics
Note: 1. The rated current will depend on the Socket you are us-
ing. It is 1 A using the XG4M for example.
2. The contact resistance is measured with the Plug mat-
ed to an XG5M-N.
■ Materials and Finish
Note: Two types of contacts and mating ends, one with gold
plating and the other with tin plating, are available.
■ Cross-sectional View of Terminal
■ Applicable Sockets
RoHS Compliant
Model XG8V XG8W
Appearance Single-row plugs with
straight terminals
Single-row plugs with
right-angle terminals
Double-row plugs with
straight terminals
Double-row plugs with
right-angle terminals
Page 2 3
Model XG8A XG8B
Appearance Single-row plugs with
straight terminals
Single-row plugs with
right-angle terminals
Double-row plugs with
straight terminals
Double-row plugs with
right-angle terminals
Page 4
Rated current 3 A (See note 1.)
Rated voltage 300 VAC
Contact resistance
20 mΩ max. (at 20 mV, 100 mA max.) (See note 2.)
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength 650 VAC for 1 min (leakage current: 1 mA max.)
Ambient operating
temperature
−55 to 105°C (with no icing at low temperature)
Model
XG8V and XG8W (See note.)
XG8A and XG8B
Base Fiber-glass reinforced PBT resin (UL94 V-0)/black
Con-
tacts
Mating
end
Brass/nickel base, 0.15-μm
gold plating
Brass/nickel base, 2.0-μm
tin plating
Brass/nickel base, 0.15-
μm gold plating
Terminal Brass/nickel base, 2.0-
μm tin plating
XG8W and XG8B
(Double Row)
XG4M Flat Cable Connectors
XG4H Board-to-Board Sockets
XG5M-N Discrete-wire IDC Connectors
(Double-row Sockets)
XG5N Discrete-wire crimped Sockets