OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CPSL03R0100JB145

P1-P3
CPSL
www.vishay.com
Vishay Dale
Revision: 22-Dec-11
1
Document Number: 30217
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wirewound Resistors, Commercial Power,
Four Terminal, Low Value
FEATURES
• Low inductance
• Extremely low resistance values
• Current sensing
• Low temperature coefficients
• High power to size ratio
• Ceramic cases are available with circuit board
stand-offs (designated with a -3 model ending)
• Superior surge capability
• Complete welded construction
• Special inorganic potting compound and
ceramic case provide high thermal conductivity in a
fireproof package
• Compliant to RoHS Directive 2002/95/EC
Notes
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
SCHEMATIC
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING P
40 °C
W
RESISTANCE RANGE
Ω
TOLERANCE
± %
WEIGHT (typical)
g
CPSL03...5 CPSL-3-5 3 0.01 to 0.10 1, 3, 5, 10 4.0
CPSL03...3 CPSL-3-3 3 0.01 to 0.10 1, 3, 5, 10 4.2
CPSL05...5 CPSL-5-5 5 0.01 to 0.10 1, 3, 5, 10 5.2
CPSL05...3 CPSL-5-3 5 0.01 to 0.10 1, 3, 5, 10 5.4
CPSL07...5 CPSL-7-5 7 0.01 to 0.10 1, 3, 5, 10 7.6
CPSL10...5 CPSL-10-5 10 0.01 to 0.10 1, 3, 5, 10 10.2
CPSL15...5 CPSL-15-5 15 0.01 to 0.10 1, 3, 5, 10 18.9
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CPSL RESISTOR CHARACTERISTICS
Temperature Coefficient ppm/°C ± 100 maximum
Short Time Overload - 5 x rated power for 5 s
Maximum Working Voltage V (P x R)
1/2
Operating Temperature Range °C - 65 to + 275
Terminal Strength lb 10 minimum
Dielectric Withstanding Voltage V
AC
1000
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CPSL05R0500JB143
GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL
CPSL03
CPSL05
CPSL07
CPSL10
CPSL15
R = Decimal
R1000 = 0.10 Ω
F = ± 1.0 %
G = ± 2.0 %
H = ± 3.0 %
J = ± 5.0 %
K = ± 10.0 %
E14 = Lead (Pb)-free bulk
E31 = Lead (Pb)-free four layer bulk
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
B14 = Tin/lead bulk
B31 = Tin/lead four layer bulk
Historical Part Numbering example: CPSL-5-3 0.05 Ω 5 % B14
CPSL-5-3 0.05 Ω 5 % B14
HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING
Sense
leads
Current
leads
L05R 5000PS JB1C 34
CPSL
www.vishay.com
Vishay Dale
Revision: 22-Dec-11
2
Document Number: 30217
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches [millimeters]
Note
(1)
Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.
MATERIAL SPECIFICATIONS
Element: Self-supporting copper-nickel alloy or nickel-
chrome alloy, depending on resistance value
Body: Steatite ceramic case with inorganic potting
compound
Terminals: Tinned copper
Part Marking: Dale, model, wattage, value, tolerance, date
code
DERATING
GLOBAL
MODEL
DIMENSIONS in inches [millimeters]
A
(1)
± 0.031 [0.794]
B
± 0.031 [0.794]
C
± 0.031 [0.794]
D
± 0.031 [0.794]
E
± 0.001 [0.025]
F
± 0.063 [1.59]
CPSL03...5 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] - 0.036 [0.914] 0.563 [14.30]
CPSL03...3 0.875 [22.22] 0.313 [7.94] 0.313 [7.94] 0.375 [9.52] 0.036 [0.914] 0.563 [14.30]
CPSL05...5 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] 0.563 [14.30]
CPSL05...3 0.875 [22.22] 0.375 [9.52] 0.344 [8.73] 0.438 [11.11] 0.036 [0.914] 0.563 [14.30]
CPSL07...5 1.391 [35.32] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] 1.000 [25.40]
CPSL10...5 1.875 [47.62] 0.375 [9.52] 0.344 [8.73] - 0.036 [0.914] 1.375 [34.93]
CPSL15...5 1.875 [47.62] 0.500 [12.70] 0.500 [12.70] - 0.036 [0.914] 1.375 [34.93]
E
A
F
CPSLxx...5
C
1.0 [25.4]
min.
B
1.50 ± 0.062
[38.1 ±1.57]
A
C
D
B
1.0 [25.4]
min.
C
P
S
Lxx...3
E
F
1.50 ± 0.062
[38.1 ± 1.57]
- 65 - 25 25 75 125 175 225 275
AMBIENT TEMPERATURE IN °C
40
0
20
40
60
80
100
120
RATED POWER IN %
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal Shock - 55 °C to + 275 °C, 5 cycles, 30 min dwell time ± (5.0 % + 0.05 Ω) ΔR
Short Time Overload 5 x rated power for 5 s ± (4.0 % + 0.05 Ω) ΔR
Dielectric Withstanding Voltage 1000 V
RMS
for 1 min ± (2.0 % + 0.05 Ω) ΔR
Low Temperature Operation - 65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 Ω) ΔR
Bias Humidity 75 °C, 90 % to 100 % RH, 240 h ± (5.0 % + 0.05 Ω) ΔR
Load Life 1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 Ω) ΔR
Terminal Strength 5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions, 360° each ± (1.0 % + 0.05 Ω) ΔR
Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (1.0 % + 0.05 Ω) ΔR
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3

CPSL03R0100JB145

Mfr. #:
Buy CPSL03R0100JB145
Manufacturer:
Vishay / Dale
Description:
Current Sense Resistors - Through Hole
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet