154BC-T-012BA-C

SENSOR SOLUTIONS ///154BC 9/2015
Page 1
154BC
SPECIFICATIONS
Low Cost
316L Stainless Steel or Titanium
19mm Diameter Package
0 - 100mV Output
Gage and Absolute
Wide Compensated Temperature Range
The 154BC is a 19mm small profile, media compatible,
piezoresistive silicon pressure sensor packaged in a 316L
stainless steel or ASTM Grade 2 CP titanium housing. The
154BC is a low cost unit designed without a header for o-ring
mounting and OEM applications where compatibility with
corrosive media is required. The titanium option offers greater
resistance to corrosive materials and harsh cleaning chemicals,
opening the range of its application use to things such as dialysis
machines and salt/brackish water measurements.
The sensing package utilizes silicone oil to transfer pressure from
either a 316L stainless steel or titanium diaphragm to the sensing
element. A ceramic substrate is attached to the package that
contains laser-trimmed resistors for temperature compensation
and offset correction. An additional laser-trimmed resistor is
included which can be used to adjust an external differential
amplifier and provide span interchangeability to within ±1%.
Please refer to the 154N uncompensated and constant voltage
datasheets for more information on different features of the 154.
154BC
SENSOR SOLUTIONS ///154BC 9/201
Page 2
FEATURES
O-Ring Mount
-20ºC to +85ºC Compensated Temperature
1.0% Interchangeable Span
1. (provided by gain set resistor)
Solid State Reliability
±0.3% Pressure Non Linearity
Titanium Option
APPLICATIONS
Medical Instruments (Dialysis Machines)
Process Control
Fresh, Waste, Salt and Brackish Water
Measurements
Refrigeration/Compressors
Pressure Transmitters
Hydraulic Controls
STANDARD RANGES
Range (psi)
Gage
Range (Bar)
Absolute
0 to 015
0 to 030
0 to 050
0 to 100
0 to 007
0 to 012
0 to 018
0 to 300
0 to 028
154BC
SENSOR SOLUTIONS ///154BC 9/201
Page 3
PERFORMANCE SPECIFICATIONS
Supply Current: 1.5 mA
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
MAX
UNITS
NOTES
Span
75
150
mV
1
Zero Pressure Output
-1.0
1.0
mV
2
Pressure Non Linearity
-0.30
0.30
%Span
3
Pressure Hysteresis
-0.20
0.20
%Span
Repeatability
%Span
Input Resistance
2.0
5.8
k
3
Output Resistance
3.0
6.0
k
Temperature Error Span
-1.0
1.0
%Span
4
Temperature Error Offset
-1.0
1.0
%Span
4
Thermal Hysteresis Span
-0.25
0.25
%Span
4
Thermal Hysteresis Offset
-0.25
0.25
%Span
4
Long Term Stability Span
%Span/Year
Long Term Stability Offset
%Span/Year
Supply Current
0.5
2.0
mA
5
Output Load Resistance
5
M
6
Insulation Resistance (50Vdc)
50
M
7
Output Noise (10Hz to 1kHz)
uV p-p
Response Time (10% to 90%)
ms
Overload Pressure
2X
Rated
8
Burst Pressure
3X
Rated
9
Compensated Temperature
-20
+85
°C
Operating Temperature
-40
+125
ºC
10
Storage Temperature
-50
+125
ºC
10
Media Pressure Port
Liquids and Gases compatible with 316L Stainless Steel or ASTM Grade 2 CP Titanium
Notes
1. For amplified output circuits, 3.012V ±1% interchangeability with gain set resistor. See application schematic.
2. Measured at vacuum for absolute (A), ambient for gage (G).
3. Best fit straight line.
4. Over the compensated temperature range with respect to 25°C.
5. Guarantees output/input ratiometricity.
6. Load resistance to reduce measurement errors due to output loading.
7. Between case and sensing element.
8. 2X or 500psi, whichever is less. The maximum pressure that can be applied without changing the transducer’s performance or accuracy.
9. 3X or 600psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing element
or transducer.
10. Maximum temperature range for product with standard cable and connector is -20°C to +105°C.

154BC-T-012BA-C

Mfr. #:
Manufacturer:
TE Connectivity
Description:
Board Mount Pressure Sensors
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union