ADP Series Power Adapters
12V 25W/36W/66W
Output Ratings / Characteristics
Voltage Range(All Models)
Output Ripple and Noise @20MHz.
BW, with 0.1uF ceramic and 47uF
Electrolytic Caps connected parallel
to load.
3 seconds @ 90Vac/60Hz
and -0°C to +45°C; OR
10 seconds at -20°C to 0°C.
Max Load Capacitance (microfarads)
0%-50%-0% and 50%-100%-
50% of full nominal load.
frequency is 60Hz, 50% duty
cycle and the slew rate shall
be at 0.02A/us.
0.1~1.5A & 1.5A~3A load at
2.5A/us slew rate , 50% Duty
cycle , Frequency be
operated 100Hz ~ 10KHz
25 % step load change at 1
A/s.at frequency 500Hz with
50% duty.
Environment, EMI and Immunity
Shipping/Storage Temperature
8% to 90% RH (Non-
Condensing)
10% to 95% RH (Non-
Condensing)
Shipping/Storage Humidity
5% to 95% RH (Non-Condensing)
10-95% RH (Non-Condensing)
Maximum of 3700 meters
(12000 feet)
-150 to 3000 meters
(-500 to 10000 feet)
Lightning Surge Immunity
Per IEC-1000-4-5
L-N, L-G, N-G, IEEE
C62.41.2, 0.5 µs – 100 kHz
Ring Wave, 1.2/50 µs - 8/20
µs Combination Wave
6KV, Criterion B
Line –Neutral 1KV/1.2 *
50us Level 3 Criteria A
L-N, L-G, N-G
Combination Wave
6KV, Criterion B
Electric Fast Transients (EFT)
EN61000-4-4 +/-1kV on
input power lines; Criterion B
I EC-1000-4-4/1995 (EN
61000-4-4) Level 3
requirements
EN61000-4-4 +/-1kV on
input power lines; Criterion B
Electrostatic Discharge (ESD)
Per IEC-61000-4-2
Contact discharge：±8KV
Air discharge：±15KV
+/-8kV air discharge; +/-6kV contact
discharge;
Dielectric Withstand Voltage (HI-
POT)
3KV AC RMS from AC Input to Output
The insulation resistance
shall be not less than 4M
ohms after application of
500Vdc/10mA for 1 minute.
The insulation resistance
shall be not less than 30M
ohms after application of
500Vdc/10mA for 1 minute.
The insulation resistance
shall be not less than 10M
ohms after application of
500Vdc/10mA for 1 minute.
Electromagnetic Interference (EMI)
CISPR 22/EN55022 Class
B.
(a) FCC Class B
(b) CISPR 22 Class B
(c) VCCI Class B
CISPR 22 :
1997/EN55022(1998) Class
B.
200,000 hours of continuous
operation at 25℃
80,000 hours of continuous
operation at 25℃
150,000 hours of operation at
90% confidence level at
25degC
Electrolytic Capacitor Operating Life
7 years at 115VAC, 40C and
100% rated load
3 years at 115 Vac and 230
Vac, and 25degC 100%
rated load
5 years at 115 Vac and 230
Vac, and 25degC 100%
rated load
