Narrow pitch connectors P4S (0.4mm pitch)
–6–
ACCTB14E 201602-T
Socket and Header are mated
EMBOSSED TAPE DIMENSIONS (unit: mm)
Dimension table (mm)
Connector orientation with respect to direction of progress of embossed tape
Mated height
Number of pins
Type of taping A B C D Quantity per reel
Socket/Header
Common for socket and header:
1.5mm, 2.0mm, 2.5mm and
3.0mm
Max. 24 Tape I 16.0 — 7.5 17.4 3,000
26 to 70 Tape I 24.0 — 11.5 25.4 3,000
72 to 100 Tape II 32.0 28.4 14.2 33.4 3,000
1.50±0.15
Header
Socket
2.00±0.15
Header
Socket
Header
Socket
2.50±0.15
• Tape dimensions (Conforming to JIS C 0806:1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
Tape I Tape II
1.75
C
8.0 (2.0) (4.0)
A±0.3
1.5 dia.
+0.1
0
Pull out direction
1.75
C
8.0 (2.0) (4.0)
A±0.3
Pull out direction
B
1.5 dia.
+0.1
0
• Plastic reel dimensions (Conforming to EIAJ ET-7200B)
D±1
Top cover tape
Taping reel
Embossed carrier tape
Embossed mounting-hole
380 dia.
Label
Type
Direction of
tape progress
Common for P4S
Socket Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.