GP2W3270YP0F
GP2W3270YP0F
IrDA Compliant Transceiver Module
9.6 to 115.2 kb/s (SIR LP)
Low Profile
Low Consumption Current
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: E3-A01101EN
Date Mar.01.2007
©SHARP Corporation
1
Description
The GP2W3270YP0F is an infrared transceiver module
for IrDA ver. 1.4 (SIR LP).
The transceiver consisits of a pin-photo diode, infrared
emitter and control IC in a single package.
This device is built in LED constant current circuit.
This device have remote control transmission function
(built in drive circuit).
Features
1. Compliant with the IrDA 1.4 (SIR LP)
Transmission speed : 9.6 to 115.2 kb/s
Transmission distance : 20 cm
2. Small package
L 7.6 × W 2.4 × H 1.5 mm
3. Peak emission wavelength : 890 nm
(Buit-in shared single LED for RC and IrDA)
4. Side view type
5. Soldering reflow type
6. Shield type
7. Low consumption current due to shutdown function
(Consumption current at shutdown mode : Max. 0.1 A)
8. Operates from 2.4 to 3.6 V
9. With built in LED constant circuit
10. With remote control function
(buit in drive circuit)
11. With V
IO
terminal
Applications
1. Mobile equipment
(Cellular phone, Pager, Smart phone, PDAs,
Portable printer, etc. )
2. Digital imaging equipment
(Digital camera, Photo imaging printer)
3. POS equipment
Agency approvals/Compliance
1. Compliant with IEC60825-1 class 1 eye safety standard
2. Compliant with RoHS directive (2002/95/EC)
3. Content status of six substances specified in Content status of six substances specified in Content status of six substances specified in Content status of six substances specified in
“ Management Methods for Control of Pollution Caused “ Management Methods for Control of Pollution Caused “ Management Methods for Control of Pollution Caused “ Management Methods for Control of Pollution Caused
by Electronic Information Products Regulation ” by Electronic Information Products Regulation ” by Electronic Information Products Regulation ” by Electronic Information Products Regulation ”
(popular name : (popular name : (popular name : (popular name : China RoHSChina RoHSChina RoHSChina RoHS) ) ) )
(Chinese : (Chinese : (Chinese : (Chinese : 子信息染控制管理))))
; refer to page 13
4. Lead (Pb) free device
1) area: Au plating
GP2W3270YP0F
Outline Dimensions
(Unit : mm)
(Unit:mm)
Dimensions are shown for reference
Recommended PCB Foot Pattern
2) Unspecified tolerance shall be ± 0.2 mm
3) Adhesion of resin to the terminal area shall be allowed Max. 0.2 mm.
*A : Distance between PCB of the transceiver and bottom
side of shield case shall be +/-0.1mm.
Center of mounting area
12
3
45
6
7
8
1234567
8
Product mass : approx. 0.04g
1 532 4 6 8
7
9
Terminal Symbol
Ground GND
TXD for Remote Control TXD-RC
V
CC
V
CC
V
IO
V
IO
Shutdown SD
Receiver Data Output RXD
Transmitter Data Input TXD
LED Anode LEDA
Shield Ground SGND
Sheet No.: E3-A01101EN
2
GP2W3270YP0F
Recommended Size of Solder Creamed Paste (Reference)
: Solder paste area
(Unit:mm)
Dimensions are shown for reference.
Please open the solder mask as below
so that the size of solder creamed paste
for this device before reflow soldering
must be as large as one of the foot
pattern land indicated for reference.
Sheet No.: E3-A01101EN
3

GP2W3270YP0F

Mfr. #:
Manufacturer:
Sharp Microelectronics
Description:
MODULE IRDA 115.2KBPS 8SMD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet