Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model C10A50Z4
Features:
• RoHS Compliant
• 10 Watts
• DC – 3.0 GHz
• Al
2
O
3
Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Surface Mount Termination
10 Watts, 50
Ω
Description
The C10A50Z4 is high performance RoHS compliant Alumina (Al2O3)
surface mount termination intended as a lower cost alternative to
Aluminum Nitride (AlN) and Beryllium Oxide (BeO). The termination is
well suited to all cellular frequency bands such as; AMPS, GSM, DCS,
PCS, PHS and UMTS. The high power handling makes the part ideal for
terminating 90 degree hybrid directional couplers, and for use in isolators
.
General Specifications
Resistive Element
Thick film
Substrate
Al
2
O
3
Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature
-55 to +125°C (see de-rating chart)
Tolerance is
0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
10 Watts
Frequency Range:
DC – 3.0 GHz
V.S.W.R.:
< 1.25:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change without notice.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
C10A50Z4 pg. 1 of 2
