SPECIFICATION CONTROL DRAWING
307 Constitution Drive Menlo Park, CA 94025, USA
Wire and
Harnessing
Products
TITLE: 3.96 (0.156) Centers
SOLDER PAK ASSEMBLY FOR AS-4000
SLEEVE: D-128-0024
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
DOCUMENT NO.:
D-704-0036
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
DCR NUMBER:
D010014
REPLACES:
N/A
DRAWN BY:
M. FORONDA
DATE:
08-Feb.-01
PROD. REV.
A
DOC ISSUE:
1
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. SOLDERSLEEVE WIRE TERMINATOR: D-128-0024, Quantity Per Assembly: 750.
2. CARRIER STRIP: Adhesive Coated High Temperature Tape
APPLICATION
1. This assembly is designed for used in conjunction with a Raychem AS-4000 Wire Organization
System on connectors with terminals on 3.96 (0.156) center spacing. For usage parameters, see
Raychem Devices Specification Control Drawing D-128-0024.
2. Wire terminators are to be inspected to Raychem Devices Specification Control Drawing D-128-0024.
