PSAC12R Characteristics
WWW.PHIHONG.COM
AC Input
Input Voltage Rating
100 to 240VAC
AC Input Voltage Range
90 to 264VAC
AC Input Current
0.5A (RMS), 120VAC at maximum load
0.25A (RMS), 230VAC at maximum load
AC Input Frequency
47 to 63Hz
In-rush Current
<30A for 120VAC at maximum load
<60A for 230VAC at maximum load
(cold start at ambient 25°C)
Leakage Current
0.25mA maximum
DC Output
Output Power
12W
Efficiency
US DoE Level VI
EU CoC Ver5 Tier1
No Load Power Consumption
100mW max @ 115V
Hold up time
10 mS minimum at maximum load, 120VAC
Environmental Temperature
Operation 0°C to +40°C
Non-operation -40°C to +85°C
Humidity 20 to 90%
Dimension Diagram Unit:mm
EMI
FCC class B, EN55022 Class B
Immunity
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5 Level 3
EN61000-4-6
EN61000-4-11
Isolation (HI-POT test)
Input to Output: 3000VAC for 1 minute, 10mA
Insulation Resistance
Input to Output: 500VDC 500M Ohm minimum
Over Current Protection
Short Circuit Auto-restart
Short Circuit Protection
Output can be shorted without damage
Over Voltage Protection
By Zener clamping if voltage exceeds 120% of limit
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000V AC for 1 min., 10mA
DC Cord
1500mm (18~24AWG)
DC Output Connector (Tuning Fork Type)
5.5mm x 2.1mm x 10mm Center Positive
Interchangeable AC Clips
RPA: US RPK: UK
RPB: Brazil RPI: India
RPC: China RPN: Argentina
RPE: Europe RPS: Australia
RPH: Korea RPX: IEC320 C8
(Sold Separately)
