SHEET 1 OF 1
LDCFDLT_A
SCALE: 2:1
TITLE:
SIZE
DWG. NO.
REV
DO NOT SCALE DRAWING
ANGLES:
1
TOLERANCES:
.020 [0.50]-.200 [5.00]=
.008 [0.20]
.200 [5.00]-1.200 [30.00]=
.016 [0.40]
1.20 [30.0]-4.75 [120.0]=
.024 [0.60]
4.75 [120.0]-12.40 [315.0]=
.040 [1.0]
DRAWN:
ENGR:
DT:
DT:
MATERIAL:
FINISH:
PROJECTION:
:
THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
REVISIONS
REV
DESCRIPTION
DATE
APPV
B
Updated footprint and dimensions; Added new title block 29-JUN-12 BPM
SMA FEMALE BULKHEAD MOUNT
CABLE END CRIMP FOR RG58 CABLE
CONSMA005-R58
C
29-JUN-12
B.MURPHY
0.020
[0.50]
RECOMMENDED CABLE STRIPPING DIMENSIONS
Descripon Material Finish
Body
Socket
Pin Insulator
Nickel
N/A
Gold
PTFE
Washer NickelBrass
Nut NickelBrass
Spacer N/APTFE
Shield Sleeve NickelBrass
Retaining Nut NickelBrass
Crimp Ring NickelBrass
Heat Shrink BlackPolyolefin
Brass
Be Cu
0.446
[11.40]
0.636
[16.30]
1/4-36UNS-2A
THREADS
SIDE VIEW
0.354
[9.00]
Ø0.049
[1.24]
SOCKET
0.065
[1.65]
NUT
1/4-36UNS-2B
THREADS
H0.315
[8.00]
Ø0.402
[10.20]
WASHER
CRIMP RING
HEAT SHRINK
RECOMMENDED
MOUNTING HOLE
0.234
[6.00]
Ø0.254
[6.50]
PIN INSULATOR
SHRINK WRAP
CRIMP RING
RETAINING NUT
SHIELD SLEEVE
SPACER
MAIN BODY
WASHER
NUT
STRIPPED CABLE
SOCKET
CONSMA005 ASSEMBLY INSTRUCTIONS
3. Insert the stripped cable through the retaining nut, shield sleeve,
and spacer.
4. Solder the socket to the center conductor.
5. Insert the socket into the pin insulator, then screw the main body onto
the retaining nut.
6. Wrap the braid around the tail of the body and crimp the ring with a
0.213” hex crimp tool (or one labeled for use with RG-58 cable).
7. Use heat shrink to cover crimp.
8. Use the nut and washer to secure the connector to a case.
2. Slip heat shrink and crimp ring onto stripped cable.
1. Strip cable to recommended dimensions.
0.996
[25.30]
Ø0.177
[4.50]
0.276
[7.00]
0.500
[12.70]
Ø0.256
[6.50]
0.035
[0.90]
Ø0.177
[4.50]
SPACER
Ø0.287
[7.30]
0.984
[25.00]
0.276
[7.00]
0.272
[6.90]
0.126
[3.20]
RG-58 Cable
S.HOGAN
29-JUN-12
NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3.
SAFETY BREAK ALL SHARP CORNERS
AND EDGES .02 MAXIMUM.
4. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE, USE
MATERIALS THAT DO NOT CONTAIN REACH SUBSTANCES OF VERY
HIGH CONCERN >1000ppm, AND USE DRC CONFLICT-FREE
SOURCED MATERIALS.
C
Updated side view and retaining nut; Updated notes 6-AUG-18 CLL
