I
NTEGRATED
C
IRCUITS
D
IVISION
www.ixysic.com
DS-LAA120L-R05
1
LAA120L
Dual Current-Limited,
Single Pole OptoMOS
®
Relay
e
3
Pb
Part # Description
LAA120L 8-Pin DIP (50/Tube)
LAA120LS 8-Pin Surface Mount (50/Tube)
LAA120LSTR 8-Pin Surface Mount (1,000/Reel)
LAA120PL 8-Pin Flat Pack (50/Tube)
LAA120PLTR 8-Pin Flat Pack (1,000/Reel)
Parameter Ratings Units
Blocking Voltage 250 V
P
Load Current 150 mA
rms
/ mA
DC
On-Resistance (max) 25
Applications
Features
Description
Approvals
Ordering Information
Pin Configuration
Switching Characteristics of
Normally Open (Form A) Devices
• Two Current Limited Relays in One Package
• 3750V
rms
Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
LAA120L is a dual normally open (1-Form-A) Solid
State Relay that has two independently controlled,
optically coupled MOSFET switches with an additional
current limiting circuit. The MOSFET switches and
photovoltaic die employ optically coupled MOSFET
technology to provide 3750V
rms
of input/output
isolation.
The optically coupled outputs, that use patented
OptoMOS architecture, are controlled by a highly
efficient GaAIAs infrared LED.
This dual switch OptoMOS relay provides a more
compact design solution than discrete single-pole
relays in a variety of applications and saves board
space by incorporating both switches in a single 8-Pin
package.
Form-A
I
F
I
LOAD
10%
90%
t
on
t
off
1
2
3
4
8
7
6
5
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
• UL Certified Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 10 05 49410 006