OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TMV 1215EN

P1-P3
http://www.tracopower.com Page 1 of 3
DC/DC Converters
TMV-EN Series, 1 Watt
Features
◆ I/O isolation voltage 3000 VACrms
◆ Reinforced insulation, rated for
300 VAC working voltage
◆
Certified to IEC/EN/UL 60950-1
safety standards
◆ Safety barrier 100 % production test
◆ Low coupling capacity
◆ Single-in-line package (SIP)
◆ Lead-free design, RoHS compliant
◆ 3-year product warranty
The TMV-EN series is a range of 1 Watt non-regulated DC/DC converters with
high I/O-isolation. This product features an isolation barrier which is approved for
supplementary an reinforced insulation. SMD construction and a special designed
toroidal transformer made it possible to built these converters in a standard SIP
package with a very small footprint. These features making the TMV-EN series an
economical solution in many DC/DC converter applications requiring safety agency
approval.
Order code Input voltage Output voltage Output current max. Efficiency typ.
TMV 0505 EN
5 VDC 200 mA 66 %
TMV 0512 EN
12 VDC 80 mA 66 %
TMV 0515 EN 5 VDC ±10 %
15 VDC 65 mA 66 %
TMV 0505D EN
±5 VDC ±100 mA 66 %
TMV 0512D EN
±12 VDC ±40 mA 72 %
TMV 0515D EN
±15 VDC ±35 mA 73 %
TMV 1205 EN
5 VDC 200 mA 66 %
TMV 1212 EN
12 VDC 80 mA 66 %
TMV 1215 EN 12 VDC ±10 %
15 VDC 65 mA 66 %
TMV 1205D EN
±5 VDC ±100 mA 66 %
TMV 1212D EN
±12 VDC ±40 mA 74 %
TMV 1215D EN
±15 VDC ±35 mA 75 %
Models
C B
Scheme
UL 60950 -1
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TMV-EN Series 1 Watt
Input Specifications
Input current no load / full load 5 Vin models: 55 mA / 285 mA typ.
12 Vin models: 30 mA / 115 mA typ.
Surge voltage (1 s max.) 5 Vin models: 9 V max.
12 Vin models: 29 V max.
Reverse polarity input current 0.3 A max.
Reflected input ripple current can be reduced by ext. 1–3.3 µF polyester film
capacitor
Input filter internal capacitor
Input fuse recommended, required for compliance with CB
– recommended fuse rating 5 V models: 500 mA
12 V models: 200 mA
Output Specifications
Voltage set accuracy ±1 % typ. / ±3 % max.
Voltage balance (dual output models, balanced loads) ±0.1 % typ. / ±1 % max.
Regulation – Input variation (1 % change of Vin) 1.2 % typ. / 1.5 % max.
– Load variation (20 – 100 %) <10 %
Ripple and noise (20 MHz Bandwidth) 100 mVp-p typ. / 150 mVp-p max.
Temperature coefficient ±0.01 %/K typ. / ±0.02 %/K max.
Short circuit protection limited 0.5 s max.
Capacitive load single output models: 680 µF max.
dual output models: 220 µF max. (each output)
Isolation /Safety
Isolation voltage – Isolation test voltage (tested for 1 s) 4‘500 Vpk
– I/O isolation voltage (60 s) 3’000 VAC
– Rated max. working voltage 300 VAC / 640 Vpk
Isolation capacitance (input/output) 15 pF typ. / 20 pF max.
Isolation resistance (input/output) >10 GOhm
Safety standards IEC 60950-1:2005 +A1:2009
EN 60950-1:2006 +A1:2010 +A11:2009
+ A12 :2 011
UL 60950-1, CSA C22.2 No. 60950-1-03
– Certification documents www.tracopower.com/overview/tmv-en
General Specifications
Temperature ranges – Operating –25°C to +85°C
– Max. ambient approved IEC/UL 60950-1 +70°C
– Case temperature +90°C max.
– Storage temperature –50°C to +125°C
Derating 2.85 %/K above 70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2’000’000 h
Switching frequency 50 to 100 kHz (frequency modulation)
Altitude during operation 4‘000m max. approved
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TMV-EN Series 1 Watt
Physical Specifications
Casing material non conductive plastic (UL 94V-0 rated)
Package weight 3.9 g ( 0.14 oz )
Soldering temperature max. 260°C / 10 s
Outline Dimensions
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
2
–Vin (GND) –Vin (GND)
5
–Vout –Vout
6
No pin Common
7
+Vout +Vout
Pin-Out
Rev. December 13. 2017
Bottom view
1 2 65 7
7.5
(0.3)
2.54
0.5
3.5
2.54
22.0
(0.87)
7.62
2.54
3.2
(0.13)
12.5
(0.49)
0.5
(0.02)
(0.02)
0.5
(0.02)
(0.1)
(0.1)
(0.1)
(0.14)
(0.3)
0.5
(0.02)
2.0
(0.08)
0.25
(0..01)
Supporting documents: www.tracopower.com/overview/tmv-en
Dimensions in [mm], () = Inch
Tolerance ±0.5 (0.02)
Pin pich tolerance ±0.13 (0.005
Pin width tolerance ±0.05 (0.002)
P1-P3

TMV 1215EN

Mfr. #:
Buy TMV 1215EN
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters Product Type: DC/DC; Package Style: SMD; Output Power (W): 1; Input Voltage: 12 VDC +/-10%; Output 1 (Vdc): 15; Output 2 (Vdc): N/A; Output 3 (Vdc): N/A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet