3 www.fairchildsemi.com
100325
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Commercial Version
DC Electrical Characteristics
V
EE
= −4.2V to −5.7V, V
CC
= GND, V
TTL
= +4.5V to 5.5V, T
C
= 0°C to +85°C (Note 3)
Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional
noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are cho-
sen to guarantee operation under “worst case” conditions.
Note 4: Test one output at a time.
DIP AC Electrical Characteristics
V
EE
= −4.2V to −5.7V, V
CC
= GND, V
TTL
= +4.5V to +5.5V
Storage Temperature (T
STG
) −65°C to +150°C
Maximum Junction Temperature (T
J
) +150°C
V
EE
Pin Potential to Ground Pin −7.0V to +0.5V
V
TTL
Pin Potential to Ground Pin −0.5V to +6.0V
Input Voltage (DC) V
EE
to +0.5V
Voltage Applied to Output
in HIGH State (with V
CC
= 0V) −0.5V to V
CC
Current Applied to Output
in LOW State (Max) twice the rated I
OL
(mA)
ESD (Note 2)
≥2000V
Case Temperature (T
C
)
Commercial 0
°C to +85°C
Industrial
−40°C to +85°C
Supply Voltage (V
EE
) −5.7V to −4.2V
Symbol Parameter Min Typ Max Units Conditions
V
BB
Output Reference Voltage −1380 −1320 −1260 mV I
VBB
= −2.1 mA
V
IH
Single-Ended Input
−1165 −870 mV
Guaranteed HIGH Signal for All Inputs
HIGH Voltage (with One Input Tied to V
BB
)
V
IL
Single-Ended Input
−1830 −1475 mV
Guaranteed LOW Signal for All Inputs
LOW Voltage (with One Input Tied to V
BB
)
V
OH
Output HIGH Voltage 2.5 V I
OH
= −2.0 mA V
IN
= V
IH (Max)
V
OL
Output LOW Voltage 0.5 V I
OL
= 20 mA or V
IL (Min)
V
DIFF
Input Voltage Differential 150 mV Required for Full Output Swing
V
CM
Common Mode Voltage V
CC
− 2.0 V
CC
− 0.5 V
I
IH
Input HIGH Current 350 µAV
IN
= V
IH (Max)
, D
0
–D
5
= V
BB
,
D
0
–D
5
= V
IL (Min)
I
IL
Input LOW Current 0.5 µAV
IN
= V
IL (Min)
, D
0
–D
5
= V
BB
I
OS
Output Short-Circuit Current −150 −60 mA V
OUT
= GND (Note 4)
I
EE
V
EE
Power Supply Current −37 −27 −17 mA D
0
–D
5
= V
BB
I
TTL
V
TTL
Power Supply Current 45 65 mA D
0
–D
5
= V
BB
Symbol Parameter
T
C
= 0°CT
C
= +25°CT
C
= +85°C
Units Conditions
Min Max Min Max Min Max
t
PLH
Propagation Delay
0.80 3.50 0.90 3.70 1.00 4.00 ns
C
L
= 15 pF
t
PHL
Data to Output Figures 1, 2
t
PLH
Propagation Delay
1.60 4.30 1.70 4.50 1.80 4.80 ns
C
L
= 50 pF
t
PHL
Data to Output Figures 1, 3
