W2D-H01

1
Features
Magnetic sensor ideal for security of gaming machines
Slim type.
Providing substantial highly-sensitive detection.
Type code standard
Type W2DH-01
(1) Represents a magnetic sensor
(1) (2)
(2) Represents a series name
Rating/performance
Item
Rating/performance
Detection distance (*1)
Top facing up: 70 to 90 mm
Side facing up: 50 to 70 mm (reference)
Electrical rating
5 DCV (-10%) to 24 DCV (+10%) 1 to 100 mA Resistive load
Contact configuration
1 a (Normally open contact)
Contact resistance
300 mΩ or less (Default: 12 DCV 10 mA Resistive load)
Insulation resistance
100 mΩ or more (Under 100 DCV)
Withstand voltage
150 ACV 50/60 Hz 1 min
Bounce time
0.5 msec or less
Vibration
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
Impact
Malfunction: 100 m/s
2
Life
1 million times or more (12 DCV 10 mA Resistive load)
Ambient temperature
When in operation: -10 to 60 deg C (must be free from freezing
or condensation)
When stored: -20 to 70 deg C (must be free from freezing or
condensation)
Ambient humidity
25 to 85% RH
*1 Detection distance refers to the distance L at which non-conducting state changes into
conducting state during the approach of a standard magnet to W2DH-01 under the
arrangements shown in figures 1 and 2.
Standard magnet: 20 x 20 x 10 (mm)/Surface magnetic flux 430 mT (millitesla)/Direction of
magnetization: direction of thickness
Connection diagram
L
L
W2DH-01
Type
W2DH-01
Slim Magnetic Sensor
Figure 1. Top
facing up
Standard magnet
Standard magnet
Figure 2 Side
facing up
2
W2DH-01
Exterior dimensions
Precautions for use
(1) When installing the sensor near the source of magnetism generation (motor, solenoid, etc.), check that the
sensor does not malfunction before using it.
(2) The detection range of the sensor installed in an amusement machine changes depending on the
arrangement of the surrounding magnetic substances (mainly metals including iron). With the surrounding
magnetic substances attached, check that the detection range is appropriate before using it.
Brand name
Type code
Lot number
Note:
1. The housing compatible with the
connector shall be Type PHR-2 made
by JST Co., Ltd.
[Unit: mm]
PIN No.1
3
W2'+-0

W2D-H01

Mfr. #:
Manufacturer:
Description:
SENSOR SWITCH SPST-NO MAG NARROW
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet