R
o
H
S
Telecom Design Guide • © 2006 Littelfuse 3 - 83 www.littelfuse.com
SIDACtor Devices
High Surge Current Two-pin SIDACtor® Device
This SIDACtor device is intended for very hostile environments such as CATV (Community
Antenna TV) systems and electronics connected to external antennas.
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number.
For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I
PP
applies to -40 °C through +85 °C temperature range.
• I
PP
is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V
DRM
is measured at I
DRM.
• V
S
is measured at 100 V/µs.
• Special voltage (V
S
and V
DRM
) and holding current (I
H
) requirements are available upon request.
* Current waveform in µs
** Voltage waveform in µs
Electrical Parameters
Part
Number *
V
DRM
Volts
V
S
Volts
V
T
Volts
I
DRM
µAmps
I
S
mAmps
I
T
Amps
I
H
mAmps
P1400ADL 120 160 3 5 800 2.2 50
P1800ADL 170 220 3 5 800 2.2 50
Surge Ratings in Amps
Series
I
PP
I
TSM
50 / 60 Hz di/dt
8x20 *
1.2x50 **
10x1000 *
10x1000 **
Amps Amps Amps Amps/µs
D 1000 250 120 500
13