STANDARD
SIZE
A
5962-89801
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
E
SHEET
3
DSCC FORM 2234
APR 97
1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
C GDIP1-T14 or CDIP2-T14 14 Dual-in-line
D GDFP1-F14 or CDFP2-F14 14 Flat pack
2 CQCC1-N20 20 Square leadless chip carrier
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535,
appendix A for device class M.
1.3 Absolute maximum ratings. 1/
Positive supply voltage (+V
S
) ...................................................................... +22 V dc
Negative supply voltage (-V
S
) ..................................................................... -22 V dc
Differential input voltage .............................................................................. ±30 V dc
Input voltage (V
IN
) ....................................................................................... Supply voltage
Output short circuit duration ......................................................................... Continuous
Power dissipation (P
D
):
Cases C, D, and 2 .................................................................................... 800 mW
Storage temperature range .......................................................................... -65°C to +150°C
Junction temperature (T
J
) ............................................................................ +150°C
Lead temperature (soldering, 10 seconds) .................................................. +300°C
Thermal resistance, junction-to-case (θ
JC
) .................................................. See MIL-STD-1835
Thermal resistance, junction-to-ambient (θ
JA
):
Case C ..................................................................................................... 91°C/W
Case D ..................................................................................................... 140°C/W
Case 2 ...................................................................................................... 110°C/W
1.4 Recommended operating conditions.
Positive supply voltage (+V
S
) ...................................................................... +15 V dc
Negative supply voltage (-V
S
) ..................................................................... -15 V dc
Ambient operational temperature range (T
A
) ............................................... -55°C to +125°C
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
________
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.