LSP05240PM Datasheet LSP05277PX3316, LSP05240PM, LSP05480P | P1-P3

Surge Protection Module

Speciﬁcations are subject to change without notice.

Revised: 05/09/16

LED Lighting Surge Protection Module > LSP05

LV UltraMOV

™

Series

Description

Features

Agency Approvals

Absolute Maximum Ratings

• For ratings of individual members of a series, see Device Ratings and Speciﬁcations chart

Agency Standard Agency File Number

UL1449 E320116

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of

the device at these or any other conditions above those indicated in the operational sections of this speciﬁcation is not implied.

LSP05 Module Series

LSP05 Series Units

Continous:

Steady State Applied Voltage:

Max AC Voltage Range (V

M(AC)RMS

) 150 to 510 V

Transient:

Maximum Discharge Current 8/20μs Waveform (Imax) 10,000 A

Nominal Discharge Current 8/20µs Waveform (I

) 5,000 A

Operating Ambient Temperature Range (T

) -45 to +85 °C

Storage Temperature Range (T

STG

) -45 to +125 °C

Isolation Voltage Capability (When the thermal disconnect opens) 600 V

Insulation Resistance >1,000 MΩ

• Maximum Discharge

Current, 10kA, 8/20us

• Meets ANSI C82.77-

5-2015: Location

Category CM, 10kV/5kA,

1.2/50µS-8/20µS

Combination Wave.

• Meets IEEE C62.41.2:

Location Category CLow,

6kV/3kA, 1.2/50µS-8/20µS

Combination Wave.

• Meets US Dept.

of Energy MSSLC

Model Spec.

• Parallel connected

SPD device

• Thermally protected

Varistor technology

• IP66 Water-proof

and Dust-proof

• Indication wire lead

options for Parallel

connected modules

• UL 1449 Type 4

Component Assembly

Recognition (Type 4CA)

• IEC61643-11 Class II/

EN61643-11 Type

2 Compliant

• Compact form factor

(48x48x30mm) with

mounting tabs

• 240Vac and 277Vac

voltage ratings are

available for Class I

and Class II installation

based on IEC luminaire

protection classes

• CE - Meets the

requirements of Low

Voltage and RoHS

European Directives.

Applications

• Outdoor and Commercial

LED Lighting

• Roadway lighting

• Trafﬁc lighting

• Digital signage

• Wash wall lighting

• Parking garage/lot lighting

• Flood lighting

• Tunnel lighting

• Street lighting

Notes:

1. Self-declared compliance.

The Littelfuse LSP05 thermally protected Surge Protective

Device is a self-protected device which is specially designed

to be used in outdoor and commercial LED lighting ﬁxtures

for transient overvoltage protection. It is constructed with

Littelfuse thermally protected varistor technology. Its built-in

thermal disconnect function provides additional protection

to prevent catastrophic failure and ﬁre hazard even under the

extreme circumstances of varistor end-of-life or sustaining

over voltage conditions. The LSP05 facilitates customer’s

product compliance to IEEE C62.41.2 Location Category C

Low and US Dept of Energy MSSLC Model Spec.

RoHS

Additional Information

Datasheet

Samples

Resources

Surge Protection Module

Speciﬁcations are subject to change without notice.

Revised: 05/09/16

LED Lighting Surge Protection Module > LSP05

Notes:

1. Nominal Discharge Current (In)(A): The nominal discharge current is a measure of the SPDs endurance capability; 15 impulses of discharge current uses the 8/20us current waveform.

2. Maximum Discharge Current (Imax)(A): The maximum discharge current is a measure of the SPDs maximum capability; single impulse of discharge current uses the 8/20us current

waveform.

3. MLV – UL1449 Measured limiting voltage; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (In); an average

voltage value of 15 impulses

4. Up – IEC 61643-11 Voltage protection level; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (In); a

rounding voltage value of maximum measurement.

5. MCOV/UC: Maximum Continuous Operating Voltage - maximum r.m.s. voltage that could be continuously applied to the SPD.

6. Part Numbers LSP05xxxPM Only.

7. * = - P or PM

8. Repetitive Surge Withstanding: 15 strikes at 5,000A (8/20us) with steady MLV/Up.

LSP05 Series Device Ratings & Speciﬁcations

Part Number

Operating

Voltage

(VAC)

MCOV/Uc

(VAC)

Maximum

Discharge

Current

(Imax)(A)

Nominal

Discharge

Current

(In)(A)

M LV

(V)

Safety Compliance

IEC/EN 61643-11

UL1449

LSP05120* 120 150 10,000 5,000

L-N:680

L-G:680

N-G:630

800 X

LSP05240* 240 275 10,000 5,000

L-N:1100

L-G:1100

N-G:1100

1200 X X

LSP05277* 277 320 10,000 5,000

L-N:1270

L-G:1270

N-G:1220

1400 X X

LSP05347* 347 420 10,000 5,000

L-N:1600

L-G:1600

N-G:1580

1700 X

LSP05480* 480 510 10,000 5,000

L-N:1780

L-G:1780

N-G:1730

1900 X

LSP05240LL*

L-L:240 L-L:275

10,000 5,000

L-L:1100 L-L:1200 X

L-N/G:120 L-N/G:150 L-N/G:680 L-N/G:800 X

LSP05480LL*

L-L:480 L-L:510

10,000 5,000

L-L:1780 L-L:1900 X

L-N/G:277 L-N/G:320 L-N/G:1270 L-N/G:1400 X

Repetitive Surge Capability for LSP05

Figure 1

Pulse Rating

(8x20µSec)

Strikes Surge

1 10,000A

2 7,000A

15 5,000A

100 1,500A

1,000 700A

Surge Protection Module

Speciﬁcations are subject to change without notice.

Revised: 05/09/16

LED Lighting Surge Protection Module > LSP05

LV UltraMOV

™

Series

SPD

N/G

AC/DC

Power

Supply

LED Module

LED normally o

Parallel Connection

With LED indicating SPD status

- ON (green): SPD is online

- OFF: SPD needs replacement

LSP05xxxPM

SPD

N/G

LED Module

LED normally of

Parallel Connection

With LED indicating SPD status

- OFF: SPD is online

- ON (red): SPD needs replacement

LSP05xxxPM

AC/DC

Power

Supply

SPD

LED Module

Parallel Connection

AC/DC

Power

Supply

SPD

LED Module

Parallel Connection

(for Class II Unearthed)

~X3316

AC/DC

Power

Supply

Part Numbering System

Device Family

Littelfuse Surge Protection Module

LSP 05 480LL

P Xxxxx

Nominal Discharge

Current (In)

Operating Voltage

Connection mode

LL: for L,L,N/G

Blank: L-N, L-G, N-G

P or PM

(P: parallel connection; PM: parallel

connection and with monitor indication wire)

Other non-standard option:

X3333: with GND wire connection, available for

240Vac and 277Vac rating with CE Marking for

Class I earthed installation

Wire Color: Line: Brown, Neutral: Blue, Ground/P:

Green with yellow stripe

3316: without GND wire connection option

Wire Color: Line: Brown, Neutral: Blue

Notes:

1. LED indicator and associated circuitry are not included in the module.

2. R1 must be capped off by wire nut when not connected (NC).

3. R1 and R2 are AC line voltage (hot); R3 is AC neutral voltage.

4. R2 voltage is cut off when SPD needs replacement.

5. R is current limiting resistor; it resistance/wattage is determined by AC line voltage

and desired current driving LED. Example: AC line voltage 240V, LED: 1.6mA, resistor:

150Kohm/0.5W.

Application/Installation Schematic

Dimensions

Notes:

1. Black: Line; White: Neutral; Green: Ground

(P/N with sufﬁx X3333/X3316: Brown: Line; Blue: Neutral; Green-Yellow stripe: Ground)

2. Black: R1; Red: R2; Blue: R3

3. Wire Gauge: AWG14 wire Line in, AWG22 Wire for indication; Wire Length: 100mm or

customized

56.0 ±0.5

100 ±20 100 ±20

48.0 ±1.5

48.0±1.5

Typical Dimensions (mm)

3 indication wires

all use the AWG22.

2x ø4.8±0.2

LSP05XXXXXP

LSP05XXXXXPM

64.0 ±1.5

30.0 ±1.0

6 ±2 6 ±2

2.3 ±0.2

56.0 ±0.5

100 ±20 100 ±20

48.0 ±1.5

48.0±1.5

Typical Dimensions (mm)

3 indication wires

all use the AWG22.

2x ø4.8±0.2

LSP05XXXXXP

LSP05XXXXXPM

64.0 ±1.5

30.0 ±1.0

6 ±2 6 ±2

2.3 ±0.2

P1-P3

LSP05240PM

Mfr. #:

Buy LSP05240PM

Manufacturer:

Littelfuse

Description:

LED Protection Devices 240V 5kA IP66 Parallel

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

LSP05240PM

LSP05240PM

Products related to this Datasheet