OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

NTB0101GW-Q100H

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21
1. General description
The NTB0101-Q100 is a 1-bit, dual supply translating transceiver with auto direction
sensing, that enables bidirectional voltage level translation. It features two 1-bit
input-output ports (A and B), one output enable input (OE) and two supply pins (V
CC(A)
and V
CC(B)
). V
CC(A)
can be supplied at any voltage between 1.2 V and 3.6 V. V
CC(B)
can be
supplied at any voltage between 1.65 V and 5.5 V. It makes the device suitable for
translating between the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).
Pins A and OE are referenced to V
CC(A)
and pin B is referenced to V
CC(B)
. A LOW level at
pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully
specified for partial power-down applications using I
OFF
. The I
OFF
circuitry disables the
output, preventing the damaging backflow current through the device when it is powered
down.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Wide supply voltage range:
V
CC(A)
: 1.2 V to 3.6 V and V
CC(B)
: 1.65 V to 5.5 V
ESD protection:
MIL-STD-883, method 3015 Class 2 exceeds 2500 V for A port
MIL-STD-883, method 3015 Class 3B exceeds 15000 V for B port
HBM JESD22-A114E Class 2 exceeds 2500 V for A port
HBM JESD22-A114E Class 3B exceeds 15000 V for B port
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
I
OFF
circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
Latch-up performance exceeds 100 mA per JESD 78B Class II
Multiple package options
NTB0101-Q100
Dual supply translating transceiver; auto direction sensing;
3-state
Rev. 1 — 3 July 2014 Product data sheet
NTB0101-Q100 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 1 — 3 July 2014 2 of 21
NXP Semiconductors
NTB0101-Q100
Dual supply translating transceiver; auto direction sensing; 3-state
3. Ordering information
4. Marking
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
6. Pinning information
6.1 Pinning
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
NTB0101GW-Q100 40 Cto+125C SC-88 plastic surface-mounted package; 6 leads SOT363
Table 2. Marking
Type number Marking code
[1]
NTB0101GW-Q100 t1
Fig 1. Logic symbol
001aan311
5
3
OE
A
4
B
V
CC(A)
V
CC(B)
Fig 2. Pin configuration SOT363
17%4
9
&&$
9
&&%
*1'
$%
DDD
2
(
NTB0101-Q100 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 1 — 3 July 2014 3 of 21
NXP Semiconductors
NTB0101-Q100
Dual supply translating transceiver; auto direction sensing; 3-state
6.2 Pin description
7. Functional description
[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.
[2] When either V
CC(A)
or V
CC(B)
is at GND level, the device goes into Power-down mode.
8. Limiting values
[1] The minimum input and minimum output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] V
CCO
is the supply voltage associated with the output.
[3] V
CCO
+ 0.5 V should not exceed 6.5 V.
[4] For SC-88 package: above 87.5 C the value of P
tot
derates linearly with 4.0 mW/K.
Table 3. Pin description
Symbol Pin Description
V
CC(A)
1 supply voltage A
GND 2 ground (0 V)
A 3 data input or output (referenced to V
CC(A)
)
B 4 data input or output (referenced to V
CC(B)
)
OE 5 output enable input (active HIGH; referenced to V
CC(A)
)
V
CC(B)
6 supply voltage B
Table 4. Function table
[1]
Supply voltage Input Input/output
V
CC(A)
V
CC(B)
OE A B
1.2 V to V
CC(B)
1.65 V to 5.5 V L Z Z
1.2 V to V
CC(B)
1.65 V to 5.5 V H input or output output or input
GND
[2]
GND
[2]
XZZ
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC(A)
supply voltage A 0.5 +6.5 V
V
CC(B)
supply voltage B 0.5 +6.5 V
V
I
input voltage
[1]
0.5 +6.5 V
V
O
output voltage Active mode
[1][2][3]
0.5 V
CCO
+0.5 V
Power-down or 3-state mode
[1]
0.5 +6.5 V
I
IK
input clamping current V
I
<0V 50 - mA
I
OK
output clamping current V
O
<0V 50 - mA
I
O
output current V
O
=0VtoV
CCO
[2]
- 50 mA
I
CC
supply current I
CC(A)
or I
CC(B)
-100mA
I
GND
ground current 100 - mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 C to +125 C
[4]
-250mW
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21

NTB0101GW-Q100H

Mfr. #:
Buy NTB0101GW-Q100H
Manufacturer:
NXP Semiconductors
Description:
Translation - Voltage Levels Dual supply translating transcvr
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet