NCP4355
http://onsemi.com
4
PIN FUNCTION DESCRIPTION
NCP4355A NCP4355B NCP4355C Pin Name Description
8 8 8 VCC Supply voltage pin
7 7 7 GND Ground
1 1 1 VSNS Output voltage sensing pin, connected to output voltage divider
2 2 2 OFFDET OFF mode detection input. Voltage divider provides adjustable off mode
detection threshold
− 3 3 VMIN Minimum output voltage adjustment
3 − 4 ISNS Current sensing input for output current regulation, connect it to shunt
resistor in ground branch.
4 4 − LED PWM LED driver output. Connected to LED cathode with current define by
external serial resistance
6 6 6 FBC Output of current sinking OTA amplifier or amplifiers driving feedback op-
tocoupler’s LED. Connect here compensation network (networks) as well.
5 5 5 ON/OFF ON mode current sink. This output keeps primary control pin at low level
in on mode.
ABSOLUTE MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage V
CC
−0.3 to 40.0 V
ON/OFF, FBC, LED Voltage V
ONOFF
, V
FBC
, V
LED
−0.3 to V
CC
+ 0.3 V
VSNS, ISNS, OFFDET, VMIN Voltage V
SNS
, V
ISNS
, V
OFFDET
, V
MIN
−0.3 to 10.0 V
LED Current I
LED
10 mA
Thermal Resistance − Junction−to−Air (Note 1) NCP4355A/C
NCP4355B
R
q
JA
260
277
°C/W
Junction Temperature T
J
−40 to 150 °C
Storage Temperature T
STG
−60 to 150 °C
ESD Capability, Human Body Model (Note 2) ESD
HBM
2000 V
ESD Capability, Machine Model (Note 2) ESD
MM
250 V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. 50 mm
2
, 1.0 oz. Copper spreader.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per JESD22−A114F
ESD Machine Model tested per JESD22−A115C
Latchup Current Maximum Rating tested per JEDEC standard: JESD78D.