TE CONNECTIVITY, SWINDON, UK
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is error-
free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves
the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the
information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are
for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest
dimensions and design specifications.
If this document is printed it becomes uncontrolled.
Product Specification Sheets
The individual markers shall be in accordance with the applicable specification sheet. In the event
of conflict between this basic specification and the specification sheet, the requirements of the
specification sheet shall prevail.
The TMS Markers shall be fabricated from modified radiation cross-linked polymers on a carrier
suitable for processing with commercially available print equipment.
See individual Product Specification Sheet for product drawings and dimensions.
This specification details the requirements for the TMS family of products. Details below are to be
used in conjunction with the applicable product specification sheet, e.g. for TMS-CM use this
specification with RW-2500-12.
Qualification tests are those performed on finished markers or marker material submitted for
qualification as a satisfactory product and shall consist of all tests listed in the applicable
specification sheet.
Acceptance tests are those performed on finished markers submitted for acceptance under the
contract. Acceptance tests shall consist of the following: dimensions, longitudinal change and pull-
off force, unless otherwise specified in the applicable specification sheet.