3007916

https://www.phoenixcontact.com/pi/products/3007916

08/18/2018Page1/5

Fuse modular terminal block-UK 5-HESI GY-3007916

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Fuse terminal block for cartridge fuse insert, cross section: 0.2 - 4 mm², AWG: 26 - 10, width: 8.2 mm, color:

Gray

The figure shows a version of the

General

Note For terminal marking, please use marking material with 8.2 mm pitch.

For lever marking, please use marking material with 6.2 mm pitch.

Number of levels 1

Number of connections 2

Nominal cross section 4 mm²

Color gray

Insulating material PA

Flammability rating according to UL 94 V2

Maximum power dissipation for nominal condition 1.02 W

Connection in acc. with standard IEC 60947-7-3

https://www.phoenixcontact.com/pi/products/3007916

08/18/2018Page2/5

Fuse modular terminal block-UK 5-HESI GY-3007916

Technical data

General

Maximum load current 6.3 A

Nominal current I

N

6.3 A

Nominal voltage U

N

Finger protection guaranteed

Oscillation, broadband noise test result Test passed

Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03

Test spectrum Service life test category 1, class B, body mounted

Test frequency

f

1

= 5 Hz to f

2

ASD level

1.857 (m/s

Acceleration 5 g

Shock duration 30 ms

Number of shocks per direction 3

Test directions X-, Y- and Z-axis (pos. and neg.)

Relative insulation material temperature index (Elec., UL 746 B) 130 °C

Temperature index of insulation material (DIN EN 60216-1 (VDE

0304-21))

130 °C

Static insulating material application in cold -60 °C

Behavior in fire for rail vehicles (DIN 5510-2) Test passed

Smoke gas toxicity NFPA 130 (SMP 800C) passed

Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3

https://www.phoenixcontact.com/pi/products/3007916

08/18/2018Page3/5

Fuse modular terminal block-UK 5-HESI GY-3007916

Technical data

Dimensions

Width 8.2 mm

Length 72.5 mm

Height NS 35/7,5 56.5 mm

Conductor cross section flexible max. 4 mm²

Conductor cross section AWG min. 24

Conductor cross section AWG max. 12

Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²

Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²

Cross section with insertion bridge, solid max. 4 mm²

Cross section with insertion bridge, stranded max. 4 mm²

2 conductors with same cross section, solid min. 0.2 mm²

2 conductors with same cross section, stranded, ferrules without plastic

sleeve, max.

1.5 mm²

2 conductors with same cross section, stranded, TWIN ferrules with

plastic sleeve, min.

0.5 mm²

2 conductors with same cross section, stranded, TWIN ferrules with

plastic sleeve, max.

1.5 mm²

Cross section with insertion bridge, solid max. 4 mm²

Tightening torque max 0.8 Nm

Standards and Regulations

Connection in acc. with standard CSA

IEC 60947-7-3