Si554
Rev. 1.1 5
Phase Jitter (RMS)
1,2,3,4,5
for F
OUT
of 125 to 500 MHz
J
Kv = 33 ppm/V
12 kHz to 20 MHz (OC-48)
50 kHz to 80 MHz (OC-192)
—
—
0.37
0.33
—
—
ps
Kv = 45 ppm/V
12 kHz to 20 MHz (OC-48)
50 kHz to 80 MHz (OC-192)
—
—
0.37
0.33
0.4
—
ps
Kv = 90 ppm/V
12 kHz to 20 MHz (OC-48)
50 kHz to 80 MHz (OC-192)
—
—
0.43
0.34
—
—
ps
Kv = 135 ppm/V
12 kHz to 20 MHz (OC-48)
50 kHz to 80 MHz (OC-192)
—
—
0.50
0.34
—
—
ps
Kv = 180 ppm/V
12 kHz to 20 MHz (OC-48)
50 kHz to 80 MHz (OC-192)
—
—
0.59
0.35
—
—
ps
Kv = 356 ppm/V
12 kHz to 20 MHz (OC-48)
50 kHz to 80 MHz (OC-192)
—
—
1.00
0.39
—
—
ps
Table 5. CLK± Output Phase Jitter (Continued)
Parameter Symbol Test Condition Min Typ Max Units
Notes:
1. Refer to AN255, AN256, and AN266 for further information.
2. For best jitter and phase noise performance, always choose the smallest K
V
that meets the application’s minimum APR
requirements. See “AN266: VCXO Tuning Slope (K
V
), Stability, and Absolute Pull Range (APR)” for more information.
3. See “AN255: Replacing 622 MHz VCSO devices with the Si550 VCXO” for comparison highlighting power supply
rejection (PSR) advantage of Si55x versus SAW-based solutions.
4. Max jitter for LVPECL output with V
C
=1.65V, V
DD
=3.3V, 155.52 MHz.
5. Max offset frequencies: 80 MHz for F
OUT
> 250 MHz, 20 MHz for 50 MHz < F
OUT
<250 MHz,
2 MHz for 10 MHz < F
OUT
<50 MHz.