OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TEN 40-4813WIN

P1-P3P4-P4
http://www.tracopower.com
DC/DC Converters
TEN 40WIN Series, 40 Watt
Features
◆
Highest power density:
40 W in 1” x 2” x 0.4” package
◆ Ultra wide 4:1 input range
◆ Excellent efficiency up to 90 %
◆ Output voltage adjustable
◆ Remote On/Off
◆ Protection against short circuit
and over voltage
◆ I/O isolation 1500 VDC
◆ Operating temperature range
–40°C to +75°C
◆ 3-year product warranty
The TEN 40WIN Series is a new range of isolated high performance DC/DC-con-
verter modules. Due to the very high efficiency of up to 90% these 40 W converters
come with a footprint of only 1.0” x 2.0”. The 12 models have an ultra wide 4:1
input voltage range and a tight output voltage regulation. The output voltage is ad-
justable by external resistor. Remote On/Off and protection against overpower and
over voltage are standard features of these converters.
Typical applications are in mobile equipment, instrumentation, distributed power
architectures in communication and industrial electronics and everywhere where
space on the PCB is limited.
Order code Input voltage range Output voltage Output current max. Efficiency
TEN 40-2410WIN
3.3 VDC 8‘000 mA 89 %
TEN 40-2411WIN
5.0 VDC 8’000 mA 90 %
TEN 40-2412WIN
9 – 36 VDC
12 VDC 3‘330 mA 89 %
TEN 40-2413WIN
(nominal 24 VDC)
15 VDC 2‘670 mA 89 %
TEN 40-2415WIN
24 VDC 1‘670 mA 91 %
TEN 40-2422WIN
±12 VDC ±1’670 mA 88 %
TEN 40-2423WIN
±15 VDC ±1‘330 mA 88 %
TEN 40-4810WIN
3.3 VDC 8‘000 mA 89 %
TEN 40-4811WIN
5.0 VDC 8’000 mA 90 %
TEN 40-4812WIN
18 – 75 VDC
12 VDC 3‘330 mA 90 %
TEN 40-4813WIN
(nominal 48 VDC)
15 VDC 2‘670 mA 90 %
TEN 40-4815WIN
24 VDC 1‘670 mA 89 %
TEN 40-4822WIN
±12 VDC ±1’670 mA 88 %
TEN 40-4823WIN
±15 VDC ±1‘330 mA 88 %
Models
Page 1 of 4
C B
Scheme
http://www.tracopower.com
DC/DC Converters
TEN 40WIN Series 40 Watt
Input Specifications
Input current at no load 24 Vin; 3.3 & 5.0 VDC models: 90 mA typ.
(nominal input voltage) 24 Vin; 12 VDC models: 95 mA typ.
24 Vin; 15 & 24 VDC models: 105 mA typ. / 115 mA typ.
24 Vin; dual output models: 65 mA typ.
48 Vin; 3.3 & 5.0 VDC models: 55 mA typ.
48 Vin; 12 & 15 VDC models: 60 mA typ. / 65 mA typ.
48 Vin; 24 VDC models: 75 mA typ.
48 Vin; dual output models: 45 mA typ.
Surge voltage (100 msec. max.) 24 V models: 50 V max.
48 V models: 100 V max.
Reflected input ripple current 24 V models: 30 mA typ.
48 V models: 20 mA typ.
Conducted noise (input) EN 55022 level A, FCC part 15, level A with
external capacitor see: application note
Start-up voltage / under voltage shut down 24 V models: 9 VDC / 8.3 VDC
(or lower)
48 V models: 18 VDC / 16.5 VDC (or lower)
Recommended input fuse (slow blow) 24 V models: 8000 mA
48 V models: 4000 mA
Output Specifications
Voltage set accuracy single output models: ±1.0 %
dual output models (balanced load): ±2.0 %
Output voltage adjustment range ±10 % with external resistor (see page 3)
Regulation – Input variation Vin min. to Vin max. ±0.5 % max.
– Load variation single output models (0 – 100%): ±0.5 % max.
dual output models (9 – 100%): ±1.0 % max.
Minimum load single output models: 0 %
dual output models: 9 % of rated max current
(operation at lower
load condition will not damage the converters.
However, they may not meet all listed specifications)
Temperature coefficient ±0.02 %/K
Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 100 mVpk-pk. typ.
with external capacitors 1 µF M/C 10 µF T/C other models: 150 mVpk-pk typ.
Transient response (25 % load step change) 250 µs typ.
Short circuit protection hiccup mode, indefinite (automatic recovery)
Over power protection at 150 %
Over voltage protection at 120 % of Vout nom. typ.
Capacitive load 3.3 VDC models: 21’000 µF max.
5.0 VDC models: 13’600 µF max.
12.0 VDC models: 2’400 µF max.
15.0 VDC models: 1’500 µF max.
24.0 VDC models: 600 µF max.
±12.0 VDC models: 1’200 µF max. (each output)
±15.0 VDC models: 750 µF max. (each output)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 2 of 4
Application note: www.tracopower.com/overview/ten40win
http://www.tracopower.com
DC/DC Converters
TEN 40WIN Series 40 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 3 of 4
General Specifications
Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +75°C (see load derating)
– Case temperature +105°C max.
– Storage –50°C to +125°C
Load derating – without heatsink 2.5 %/K above 55°C
– with heatsink 2.5 %/K above 65°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 330’000 h
Isolation voltage (60 sec.) – Input/Output 1500 VDC
Isolation capacitance – Input/Output 1500 pF typ
Isolation resistance – Input/Output >1000 Mohm
Switching frequency (fixed) 320 kHz typ. (pulse width modulation PWM)
Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011)
ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011)
IEC 60950-1:2005 (2nd Edition); +A1:2009
– Certification documents www.tracopower.com/overview/ten40win
Remote On/Off – On: 4.7 to 12 VDC or open circuit.
– Off: 0 to +1.2 VDC or short circuit pin 3 and pin 2
– Off idle current: 2.5 mA max.
Physical Specifications
Casing material aluminum black anodized
Potting material epoxy (UL 94V-0 rated)
Weight 30 g (1.05 oz)
Soldering temperature max. 260°C / 10 sec.
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Output Voltage Adjustment
Rd
Trim
+Vout
Ru
Trim
-
Vout
Trim up Trim down
Single output models only (open = nominal output voltage)
Ru [kOhm]*
output 3.3V 5V 12V 15V 24V
+5% 7.34 12.30 41.40 50.15 27.38
+10% 0.65 0.48 2.70 3.58 0.34
Rd [kOhm]*
output 3.3V 5V 12V 15V 24V
–5% 8.51 16.53 47.15 63.35 38.04
–10% 0.50 1.24 1.35 4.92 1.12
*approximate values
P1-P3P4-P4

TEN 40-4813WIN

Mfr. #:
Buy TEN 40-4813WIN
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet